1 / 3
Eurorack Blank Panel │3U – 2 to 20 HP │ "Circuit Chaos" — zdjęcie 1
1 / 3

Eurorack Blank Panel │3U – 2 to 20 HP │ "Circuit Chaos"

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Easy to print cool eurorack blank panels.

Ocena
5 / 5
Polubienia
22
Pobrania
172
Wydruki
2
Wyświetlenia
1016
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Open Community License v1

EURORACK Blank Panel │3U – From 2 to 20 HP │ "Circuit Chaos"

Best to print with a 0.4mm nozzle, layer height  0.2mm or smaller.

The “circuit chaos” is made of 0.5 and 1mm pipes so technically it is possible to do 2 colour changes, I think (I haven't tried though).

Please share your make with your favourite colour combination!

There are holes on the plate surface. They do not go through the model, but stop short at 0.2mm from the bottom face -→ depending on the filament you use, it is thin enough to let LED lights from inside your case to glow through.

You can also add them to your rack on ModularGrid:

https://www.modulargrid.net/e/modules/browser?SearchName=%5Bo_o1&SearchVendor=82&SearchFunction=&SearchSecondaryfunction=&SearchHeight=&SearchTe=&SearchTemethod=max&SearchBuildtype=&SearchLifecycle=&SearchSet=all&SearchMarketplace=&SearchIsmodeled=0&SearchShowothers=1&order=newest&direction=asc

 

3D-printed blank panels are often boring, so I try to make cool and easy to use ones.

Tagi