Vector Rail Eurorack Frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple frame to hold a pair of vector rails (TS100 series) at the proper spacing for eurorack panels. This is a…
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 62
- Wydruki
- 1
- Wyświetlenia
- 567
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple frame to hold a pair of vector rails (TS100 series) at the proper spacing for eurorack panels. This is a quick design I made in order to begin prototyping a rack system while I build a more permanent case. It turned out well enough I may just add some side and end panels and use it longer term.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.20
Infill:
15%
Filament: Prusament PLA Galaxy Black
Notes:
Print is simple, can scale vertical to suit your use. Suggested printing a few layers to test fit if your printer makes holes under-/over-sized. Mine was snug, but solid once the rails were inserted.
Category: Music