Eurorack / 3.5mm / USB Cable Holder for Mic Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Eurorack patch, 3.5mm, USB cable holder for microphone stands that fit on a Bambu Labs X1C, 5/8" hole diameter.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 143
- Wydruki
- 0
- Wyświetlenia
- 887
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
I am in the process of organizing my studio and found a design similar to this, but it didn't take advantage of the full 256mm² bed of my Bambu X1C. So I made a slightly larger version. Also fits most generic USB cables and other cables of similar thickness.
My cheap mic stands have a 5/8" hole diameter that I'm able to screw right on to.
I printed in ASA with almost stock Bambu slicer settings, because that's what I had loaded at the time. I only added alternate walls and I upped the bed temp to 100C. Should print great in almost any filament.
Thanks for looking!