Eurorack Chassis For Raspberry Pi B
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For those sweet sweet raspberries in your synth.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 85
- Wydruki
- 0
- Wyświetlenia
- 579
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Same as the other models, M3 machine screws for mounting, #6 x ½" (3mm x 10mm) wood screws for assembly. Raspberry Pi of course uses M2.5 screws for mounting so you'll need 4 of those as well. They thread right into the standoffs. You can install a molex female in the back for power. Sources on github.
These models should fit other computers that follow the same formfactor, specifically the le potato from librecomputer(3B Faceplate) has been tested and works.
See the rest of the collection here:
https://www.printables.com/@Beefdip_176978/collections/1432728
Github Page for the project with Openscad/Freecad Sources
https://github.com/Real-Time-Kodi/EuroServerRack/