1 / 3
Gietec inspired Eurorack Rails 42 and 48 hp — zdjęcie 1
1 / 3

Gietec inspired Eurorack Rails 42 and 48 hp

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A eurorack rail designed in blender off the Gietec rail image i had found. i decided to not add the back rail as i…

Ocena
0 / 5
Polubienia
9
Pobrania
76
Wydruki
0
Wyświetlenia
323
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

A eurorack rail designed in blender off the Gietec rail image i had found. i decided to not add the back rail as i wouldnt be using it.

i printed mine with a brim vertically at 42hp, realised i had more room left on my Z axis so i managed to fit in another 6hp to make a 90hp rail when joined together in the middle. But the 48hp on looked a little warped by the end to me, could just be my printer tho haha.

I havent tested what size(depth?) nut will actually fit in the gap, so it might be worth cutting the Z axis height in your slicer before exporting gcode for a test print.

EDIT: Ive added a reworked version that might work out to be stronger after some pointers =) Only the 42hp version so far.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

**Rafts:**

No

Supports:

Yes

**Resolution:**

0.2

Infill:

60%

**Filament:** Any PLA Any

Notes:

Printed vertically with an adhesion skirt/brim for stability.

Category: Hobby

Tagi