Low backlash belt gearbox
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Belt-driven gearbox using T5-210 mm belts, with no backlash. Stackable in steps of 1:4.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 255
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
Backlash is almost nonexistent in belt-driven systems, making a belt reducer a very good option for precise applications. This system uses a T5 belt-pulley mechanism, which is much easier to print than a typical GT2 system.
The total assembly requires 4 M3 screws, an M6 threaded rod, and 5 M6 nuts. It can be stacked indefinitely as long as the threaded rod is long enough. Each stage provides a reduction of 1:4, resulting in a 1:64 reduction in the video.
In the future I will try to print the belts out of tpu, it should work pretty well.
I use this system for my homemade wire EDM machine, which requires very slow movements.