Wall Mountable Solder Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple surface or wall mountable solder spool holder with built-in guide
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 221
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Help organize your workshop with this simple wall/surface mountable solder spool holder. This is a remix of Daniel Smith's solder spool holder. This improved version uses a slotted cylinder instead of two separate pieces to hold the spool in place, which provides better stability and ease of use. Compatible with spools that are 34mm wide or less, with an inner spool diameter of 18mm or greater.
This spool holder also has two mounting tabs added to allow for easy surface or wall mounting if needed (requires M5 bolts/screws).
For printing I recommend the following settings:
- PLA or PETG (or any other filament of your choice)
- Gyroid infill (minimum 10%)
- No supports needed