Dust collector for vacuum cleaner with self adhesion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Self adhering dust collector/catcher for your vacuum cleaner for drilling holes dust-free
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 19
- Wydruki
- 1
- Wyświetlenia
- 98
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Tired of dealing with scattered dust and cleaning up after drilling some holes at home?
Have a look at my dust collector/catcher designed for self-adhesion and effective dust capture. It works with most vacuum cleaners, making your drilling routine easier, quicker and tidier. Sticks to the wall just as printed without any additional adaptation. The dust collector features an internal channel to direct the dust to the vacuum cleaner, so that the wall where the suction is applied stays clean. The vacuum port is suitable for vacuum cleaners with 35 mm outer diameter of the endpiece on the hose. The maximum recommended drilling diameter is 10 mm.
Printing
- No supports needed, when printing on the model's nose/tip.
- Printed in PETG, but I believe any material with good bed adhesion also works.
- Print with brim, if you have low bed adhesion or want to be on the safe side.
Model
You can find the original model in OnShape here:
https://cad.onshape.com/documents/966fed6b140616bb1634982f/w/59f4d3379951fcff7151cec2/e/47e5fd330c3908039fb14328
Feedback
Feedback? Ideas for improvements? Please leave a comment or drop me a message.