1 / 5
Dust collector for vacuum cleaner with self adhesion — image 1
1 / 5

Dust collector for vacuum cleaner with self adhesion

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Self adhering dust collector/catcher for your vacuum cleaner for drilling holes dust-free

Rating
5 / 5
Likes
4
Downloads
19
Makes
1
Views
98
Reviews
1

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

Tired of dealing with scattered dust and cleaning up after drilling some holes at home? 

Have a look at my dust collector/catcher designed for self-adhesion and effective dust capture.  It works with most vacuum cleaners, making your drilling routine easier, quicker and tidier. Sticks to the wall just as printed without any additional adaptation. The dust collector features an internal channel to direct the dust to the vacuum cleaner, so that the wall where the suction is applied stays clean. The vacuum port is suitable for vacuum cleaners with 35 mm outer diameter of the endpiece on the hose. The maximum recommended drilling diameter is 10 mm.

 

Printing

  • No supports needed, when printing on the model's nose/tip.
  • Printed in PETG, but I believe any material with good bed adhesion also works.
  • Print with brim, if you have low bed adhesion or want to be on the safe side.

 

Model

You can find the original model in OnShape here:
https://cad.onshape.com/documents/966fed6b140616bb1634982f/w/59f4d3379951fcff7151cec2/e/47e5fd330c3908039fb14328 

 

Feedback

Feedback? Ideas for improvements? Please leave a comment or drop me a message. 

Tags