MK Family & MINI Camera Mount | Buddy3D
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Camera mount for Buddy3D Camera
- Ocena
- 4,85 / 5
- Polubienia
- 335
- Pobrania
- 2153
- Wydruki
- 65
- Wyświetlenia
- 10 629
- Oceny
- 60
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v3.0
This Buddy3D Camera mount is compatible with MK Family and MINI standalone printers including MK Family and MINI in the enclosure.
Please note that magnets for using the camera mount in MK & MINI enclosure are recommended. Magnets prevent accidental camera movement due to vibration while using the printer, the recommended position is in the top front left corner in order to achieve clean image without affecting the LED strip.
recommended magnet size : 20x6x2mm - Neodymium magnet (4 Pcs).
You can find them on our eshop.
Recommended settings:
Default 0,2mm layer height profile, PETG filament, supports are not needed.
How to guide
Installation:
- For MK_MINI_Mount please prepare
- MK_MINI_base (1 pc)
- MK_MINI_Twist_lock (1 pc)
- Screw M3x10
- For MK_MINI_Enclosure Mount please prepare
- MK_MINI_ENC_base (1 pc)
- MK_MINI_Twist_lock (1 pc)
- Screw M3x10
Info:The rest of the guide is the same for the both versions
- Remove the build-in support structure from MK_MINI_Twist_lock.
- Connect the two plastic parts and screw the M3x10 screw into it.
- Twist and lock the camera into the mount
- Step 1
- Step 2
- Step 3
