1 / 2
Bosch 1617EVS/RA1161 dust port for router table — zdjęcie 1
1 / 2

Bosch 1617EVS/RA1161 dust port for router table

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This vertical dust port allows the 1617EVS with RA1161 fixed base to slip through the opening on a router table.

Ocena
0 / 5
Polubienia
16
Pobrania
135
Wydruki
0
Wyświetlenia
535
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

This variation provides a pretty good fit to the “window” on the RA1161 base. 

I moved the plastic piece that Bosch provides to cover that window to the other side of the base. Slipping the cover behind the height adjustment shaft is a bit fiddly but it will slip right in once you find the right angle.

I printed with PETG for a bit more flexibility than typical PLA. Printing in a PLA with reasonable toughness should be fine as well. 

Precise dimensions are all in the X-Y plane, so 0.20 mm layers are fine.

Like Photoroamer's version, organic tree support for the big opening is all that's needed.

Tagi