1 / 11
Adapter Frame for Philips Hue Tap Dial and ABB Jussi / Busch-Jaeger Reflex SI switches
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter Cover Frame to replace 85mm Jussi / Reflex SI cover frame.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 867
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (14)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (12)Powiązane
Remove the existing Jussi/Reflex SI cover frame and replace it with the new adapter cover frame. For 2-gang to 5-gang switches, there is an additional cover plate if you want to block access to those light switches.
To my understanding, ABB Jussi switches are identical to Busch-Jäger Reflex SI switches, so these should work with them as well. Please let me know if that's not the case.
I printed the parts in PETG. Here are my print settings for the adapter cover frames:
- Layer height: 0.2 mm
- Walls: 2
- Floor/roof: 3 layers
- Infill: Gyroid 10%
- Supports: Yes (see the picture). Set the overhang angle to 30 degrees. This ensures that supports are generated only on specified face.
Print settings for the cover plate:
- Same as above, but without supports.
CHANGE LOG
- Cover plate (Rev. - to Rev. A): Tolerances were too tight, which made mounting difficult. This has now been fixed.