1 / 11
Adapter Frame for Philips Hue Tap Dial and ABB Jussi / Busch-Jaeger Reflex SI switches
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter Cover Frame to replace 85mm Jussi / Reflex SI cover frame.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 46
- Makes
- 0
- Views
- 885
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
Remove the existing Jussi/Reflex SI cover frame and replace it with the new adapter cover frame. For 2-gang to 5-gang switches, there is an additional cover plate if you want to block access to those light switches.
To my understanding, ABB Jussi switches are identical to Busch-Jäger Reflex SI switches, so these should work with them as well. Please let me know if that's not the case.
I printed the parts in PETG. Here are my print settings for the adapter cover frames:
- Layer height: 0.2 mm
- Walls: 2
- Floor/roof: 3 layers
- Infill: Gyroid 10%
- Supports: Yes (see the picture). Set the overhang angle to 30 degrees. This ensures that supports are generated only on specified face.
Print settings for the cover plate:
- Same as above, but without supports.
CHANGE LOG
- Cover plate (Rev. - to Rev. A): Tolerances were too tight, which made mounting difficult. This has now been fixed.