1 / 2
Weller WX Series Solder Pencil Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Solder Pencil Holder for Weller WX series
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 231
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (10)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (3)Powiązane
I needed some holders for my Weller soldering pins for my new WX2 soldering station. So I checked what was available and modified the existing designs I liked to my needs.
WX does not need a magnet for standby detection so there is no space for one.
WXMP is also in the making, but I have no grip yet so I can not finish this design.
For weight and cooling down the hot solder when using the brass wool the shorteded hood version is for adding a 5mm metal plate inside the scraper basin.
For assembly following screws are used:
- 2x M3 nut and 2x M3x12mm sink head screw for mounting the frame to the base
- 1x M3x8mm sink head screw for mounting the arm to the frame
- 2x M3x10mm cylinder head screw for mounting the spare tip holder to the base (for ech one)