1 / 11
Ruger LCRx 3inch Holster "The SideWagon" - Modular Attachements — zdjęcie 1
1 / 11

Ruger LCRx 3inch Holster "The SideWagon" - Modular Attachements

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Revolver Holster for my Ruger LCRx 3inch Modular Spine System -> Yesss heavy influence from TREX ARMS Sidecar 2.0

Ocena
5 / 5
Polubienia
22
Pobrania
174
Wydruki
1
Wyświetlenia
956
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Sports
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Revolver Holster for my Ruger LCRx 3inch

Modular Spine System -> Yesss heavy influence from TREX ARMS Sidecar 2.0

The Spine System has Loops & Spaces in 0.25 inch / 6.35mm increments

The “Friction Washer” is not necessary to print. The Pin holds just fine.

for example you can use the Tourniquet Holder from TREX ARMS or the other attachments.

 

You can use this Holster as Stand Alone, or with the 5 Round Speed Strip holder.

you can run it with one belt loop or a second one on the Attachment, however you want.

Print with enough walls (5 or more) to maintain stability.

 

As far as Screws go: I just used M5 Rounded Philips Head Screws → Might need to Cut to Length and Stop Nuts/Lock Nuts of 5.3mm height.

 

 

Change Log:

01.Jan 2025: Happy New Year! New Streamlined version with different Belt Clip placement.

Tagi