505 modeli
10000 Downloads! Thanks to everyone who supported this project! I never thought I would reach this number! This is a Remix of Printable VELCRO by eried. I really liked his model, but the only way you can use it is by gluing the pieces,…
Those simple holders may be applied to your trunk floor using velcro. They will then keep things in place and ensure nothing is flying around in your trunk. The model is intended to be used with 2cm wide velcro. You should be able to get…
Overview I was amazed by the functionality of the fully 3D printed velcro entered into the recent velcro themed Printables competition: https://www.printables.com/contest/397-hook-loop-prints The winning entry by MM Printing felt…
Here we go again next project for the contest This velcro organizer is specially design to have the most necessary things always at hand. How many times you get in and get out the car? Tired of looking the most necessary things to take…
The Mikoyan MiG-29 Fulcrum fighter jet, easy one of my top aircraft, ever since I saw it perform at an air show many years ago :') ...which you can now hang from your christmas tree! Came out way better than I expected it to, was worried…
Recomended to print with PET-G, ABS or any car temperature resistant material. You will need to buy 50 mm wide velcro. To atach the velcro to 3d printed holder i used MAMUT glue (one-component adhesive with high adhesion) but i think you…
Holder to fix velcro stripe or zip tie by screw or glue. usable for: velcro stripe / zip tie / cable tie width: 10 / 20 mm support: not needed (printed on side -> see picture) material: not defined (PETG/PLA used by me)…
v3: Added corrected brackets for mounting with velcro or command strips, if screw mounting to the wall is not an option. They should print properly now! Get your CPAP off your nightstand! Get it on the level of the mattress, too, if your…
Prusa CORE One Swing Arm Cable/PTFE Brackets instead of the inelegant Velcro fasteners. If you don't like the cable/PTFE management with Velcro fasteners on the swingarm, here is a more elegant solution using printable brackets (cable…
The Fondor from the Star Wars Andor Show. Owned by Luthen Rael. https://starwars.fandom.com/wiki/Fondor_Haulcraft
If you have plenty of patches, flags etc but not enough velcro loop are to put them here is you answer: MOLLE compatible plates for your patches. Lite model for stitching a piece of velcro loop to and then attach the whole thing to your…
Lever type laptop stands Left and Right sides which give a ~10 Degree keyboard angle and raise the screen ~50mm. Designed to work on a Dell M3800 laptop which is15mm thick but should suit laptops up to 25mm. Print Settings Printer:…
This is the first iteration (third internal) of my attempt to make printable Velcro. It is pretty nice to hang things, probably this small piece will resist much more than a kilogram of weight (hanging weight) and it is very easy to…
This handy little GoPro mount attaches your cam to a backpack strap or other object. I made it for backpacking and use it as my only mount out on the trail. It's great for live action shots from your chest strap. Strap it to a small…
When I saw the "Velcro" Contest here on Printables.com, I thought it was literally a challenge to see who could make the best 3D Printed Velcro! Well, after seeing that's NOT what everyone was doing, lol, I decided to try. Well, I am…
Introducing my latest creation: A 3D-printed Velcro strap buckle. Key features: You can remix & improve the model freely! All the files are orientated for convenient printing in STEP, STL & 3DM formats! No supports are required! Easy &…
About the MIG-29 Fulcrum The Mikoyan MiG-29 Fulcrum is a twin engine fighter aircraft designed in the Soviet Union. It was developed as an air superoirity fighter during the 1970s. The MiG-29 was developed to counter U.S. fighters such as…
Print with the back of the model on the build plate. I used supports on the strip cavity only. I printed with natural ASA, but any material should be fine. I included the .step and .f3d files in case you want to modify the hook for…
Post a make if you print this! :) Seeing our creations out in the wild is inspirational knowing it's helping other folks and encourages creators to put more out there. Needed a velcro anchor. Designed these and mount with 1/2" #6 wood…
Корпус для транзистор-тестера LCR-T4. Минимальные габариты, хорошая жесткость. Два варианта исполнения нижней части: под две ячейки 14400 с USB-C зарядным модулем и пустая коробка, в которую поместится 1-3 14500, 1-2 18650 или стандартная…
Small base for cheap Velcro straps that can be hotglued under the desk for neater cable management.
30x30 mm mount for velcro cable ties (up to 16mm width), which can be either glued or screwed onto a surface.
Landscape mount for HSW environment. Two choices, one for standard single use command strips and one for use of velcro command strips . Thanks to Spatula for the inspiration.
Description: Declutter your workspace with my under-desk cable management solution! This 3D-printed accessory is designed to keep your cables organized and out of sight, providing you with a clean and organized work environment. Features:…
This is a Collection of Cable Tie Holder and Velcro Strap For Screws or Double-Sided Adhesive Tape. Chamfer down and standing printing.
Hey guys, after tons of updates I would like to introduce you a printable alternative for hook & loop. Voilà! Easy to use - you just need to stick it on flat sides to whatever you need removable and hanging (I used a glue gun). Also, feel…
Remix of smaller snap version of "Fishing Waste Line Collector" by sthone that does not use velcro and has improved fit.
This is something I did in Fusion 360 a few years ago during the 2020 shutdown. I originally printed this on my Airwolf Axiom machine and was never really happy with the print quality, but have been using it ever since and the…
Case for the LCR-T4 with power switch, parts tray and extra connector for external functionality. The extra connector is optional, it gives you the option to make a plug to attach test leads for testing components that don't fit in the…
This remix allows the use of cable ties and velcro straps with the honeycomb storage wall. Two directions are provided for each, to allow horizontal an vertical placements Best printed in PETg (PLA will also work) does not need any…
The original design fitted my LCR T4 but it was not perfect. You still need to print the bottom case from the original design. Print instructions This is the one I ordered https://s.click.aliexpress.com/e/_DlLbzqD different vendors have…
A remix of "Fishing Waste Line Collector" by sthone that does not use velcro. Instead, thread the fishing line into the holes of the inner cylinder. Compatible with the original M3 screw version files. CHANGES Outer Cylinder: improve…
This bracket has been designed to use a 20mm wide velcro strap to hold cables in place. The internal shape ensures no supports are required when printing and makes it easy to slide the strap through the loops without any hassle. Bracket…
Remixed it with 2 and 3 ribs to have it firmer for heavy load, so I can use less of them. Print it with the holes on the plate (like the original one). Print settings Material: PETG (or any other material that can handle the load).…
Case for FNIRSI LCR-P1
This is upgrade part to replace the pins on SCX24 trucks with a flat plate that velcro or magnets can be attached to. This was inspired by the mounts the newer bronco model. There are multiple adjustment points to allow more flexibility…
This is my first ever published model, and yes, it's literally a square with a hole in it. I recently got a Dillon 550 and when I had powder issues I saw this stupidly small white square had fallen onto the floor - somewhere. I managed to…
Sanding using this pad feels natural. With an almost flat hand resting on the curved surface you can sand without tightening your fingers. This allows you to effortlessly sand for hours without cramping your hand or fingers. The Velcro…
LCR - T4 (Transistor, Capacitor, Resistor, etc.) Tester case with the addition of a separate opening compartment for a 9V battery type 6F22. It is recommended to position the parts when printing as indicated in the 6th image and use…
Boss pedals have a rubber foot and information label that don't play nicely with adhesive velcro tape. This part allows you to easily mount to a pedalboard without any additional hardware. Remove the four Phillips screws from the bottom…
Občas se hodí variabilní upevnění kabelů. Třeba proto, aby se neváleli po zemi. Toto je klip pro ‘škrk’ pásek šíře max. 20 mm. Připevňuje se vrutem D3 nebo oboustrannou lepicí páskou šířky max. 20 mm. Vytištěno jest z PETG (není…
Yesturday I helped a good friend to improve his Camper. Therefore I printed some Velcro holders to mount the Solar Panel & its Cable securely to a wall. The holders are for different widths of velcro and very strong. (I hang myself onto…
Please leave a ♥ Like if this print was helpful to you :-) A simple design that takes a 20mm velcro cable tie from either side and holds cables in place somewhat safely. Recommended to print with PLA. Print Settings Rafts: No Supports: No…
Changes in this remix: Removed bay for 9v battery to create space to add a 18650, TP4056 charging board and boost converter board. Make the opening for power switch smaller to use with my switch. (from 12.9x19.5 to 8.8x13.6 opening)…
designed as a low profile alternative for official snaps. fits velcro ties up to 12 mm wide
A strong mount to attach Velcro / hook and loop loops and straps to IKEA SKÅDIS pegboards. It is a remix of the Velcro Clip by Pavel Riedl that has been adapted to work with Skadis T-Nuts for easy and secure installation on Skadis…
This remix was created to achieve a cleaner aesthetic and better cable management for the Prusa CORE One Plus . I have unified two popular designs to permanently eliminate the "inelegant" Velcro straps provided by default, ensuring that…
In addition to the printed parts, you will need: 4x M3 Screws 4x M3 nuts 2x Small magnet (8x3mm) You may also need some tape to make the tester board a little bit thicker since depending on your printer, the board fit could be a little…
This is a trimmed-down version of the Steam Velcro Strap Brace for Power Banks modified by making it for the Killswitch case by Dbrand. If you own a Killswitch case you no longer need to use deckmate accessories, just attach the item you…
Added 9V battery compartment and some descriptive text on the front panel
This is, currently, the most time and material efficient design (takes half as much time and plastic) Velcro cable tie mount design on Printables. While thinner and lighter, it's just as sturdy and durable. Can be stuck to any surface…
Hi, wltoys 12428/12429 owners, I believe you do know that steering is not perfect in those models, and here is the ultimate solution to resolve all the issues ;) Enjoy, share your prints, suggest improvements, and be safe! What you need…
Finally decided that the LCR-T4 meter rolling around on my desk needed a case. Wanted a "toolless" case, so here it is. I used this switch from jaycar: ultra-mini-rocker-switch . Model is based on this case by Phenomen however this is a…
I wanted a cleaner way to run a few cables along my small server rack and made this little part. You just put a velcro cable tie through the middle part to hold cables on. Zip ties would work too, but I don't really like zip ties for such…
This is the piece of the steering assembly that attaches to the servo on a 2WD Rustler. Compatibility: Traxxas Bandit Traxxas Drag Slash Traxxas Nitro Slash Traxxas Rustler 2wd Traxxas Slash 2wd
We've all seen them. those sleek, minimalistic and modern 3d printable wallets. they're pretty cool. customisable, cheap, easy to replace… but sometimes you have the need for speed… Introducing this card holder for your office pass,…
Revolver Holster for my Ruger LCRx 3inch Modular Spine System -> Yesss heavy influence from TREX ARMS Sidecar 2.0 The Spine System has Loops & Spaces in 0.25 inch / 6.35mm increments The “Friction Washer” is not necessary to print. The…
I wanted to use velcro in my Traxxas Slash and Traxxas Rally with LCG. I designed it to use original screws and to be secured with double sided tape in the middle for extra strength. The double sided tape also helps to keep the distance…
These remixes add mounting points to MarkL's excellent pistol grips for the Quest 2 controllers. There are two versions. Version 1: socket mount Version 1 is designed for these 12" elastic cinch straps , and should work with any 1"-wide…
LCR-T4 Case for original or customized version like mine with ICSP connector from bottom side and micro switch replaced by rotary encoder. ICSP pins are reversed - special cable reduction is required. Original project:…
THIS IS A COPY - I copied this from thingiverse, because I very much like the design and have printed it myself. It was originally created by monkeypantman. Again: This is not a Remix, it is a copy. RELEASE VERSION So here it is, V3.1 of…
A simple case for a cheap LCR-meter from amazon. Look for “ARCELI LCR-T4 ESR Meter” to see the type, there are also different ones with different mounting holes. You can use M3x5mm bolts to fix the board, just directly screw them into the…
Luthen Raels Fondor Haulcraft : Andor : StarWars
The laser cut acrylic case that comes with the cheap LCR-T4 meter found on ebay cracked, so I challenged myself to learn Fusion 360 and model my own. Prints easily without supports, print the front half with the face down and the back…
This is a housing suitable for the component testers known as M-Tester or LCR-T4. The area for identifying SMD components is not accessible. 4 M2.3 and 4 M2 self-tapping screws are required for assembly. For my application it works really…
Yet another enclosure for transistor tester. Designed for LCR T4 chinese clone (yellow PCB and a button in right bottom side). The battery compartment is located on top for easy access and quick battery disconnection e.g. to reset device.…
I looked for an LCR-T4 case with the following features, but couldn't find one, so I made it myself. Built-in battery No need to remove screws when replacing the battery Battery and screws are hidden Access to terminals for measuring…
Needed a mount point / anchor for cable routing. Designed for 2cm wide velcro strap, such as Solarix SXSZO-20MM-25M-BK but can be used for zip ties, etc. For routing only! Weight bearing not guaranteed. Available in two options: a)…
FEATURES Keep precious cargo from sliding and tumbling around in your trunk or car floor. Great for transporting cakes, pizzas, and other important packages. TIP: Use a color that stands out so they don't get lost in the depths of your…
Modified AmicoJeko's model to thicken the base slightly to fit command velcro strips rather than the standard strips that would leave an exposed pull tab. The velcro ones can be completely invisible. The strips I used are 20mm wide and…
I took the original chassis, added a hinge, and freed up the entire center section. It should work like the original Cox Iso-fulcrum chassis design. Update 10 Feb 2019: Improved hinge design. Category: Hobby
This is remix of https://www.thingiverse.com/thing:2999383 LCR tester model: LCR T4 (PCB dimension: 60mm x 72.6mm) BoM: 1x LCR T4 tester PCB 4x 2.5x6mm screws (for PCB) 1x XT60 connector male 1x XT60 connector female 1x Vigan 24.102.4 - 2…
34b Fire extinguisher holder for velcro tape to mount it on car interior.
This case is a remix from @xvilla_2875915 FNIRSI LCR-P1 Transistor and Capacitor tester parametric rugged case. Nothing special in the print parameters of this design for the remix is the added logo and details of the tester information…
Protective fingertip cover for people with an injured or damaged fingertip. Slides over the wounded finger and locks in place with a Velcro strap, so it stays put while you work. Absorbs accidental knocks and impacts, letting you keep…
A Steam DeckMate compatible print to strap devices to such as power banks, USB-C Hubs, or NVME drives) as an alternative to the universal puck. Use Velcro cable ties for a non-permanent method of attaching devices; I suggest buying a bulk…
This is a case for the electronic components tester LCR M328 T4. The case has 2 parts, an top and a bottom part that are connected by screws. You wil need to assemble it : 8 pcs. screws M3 x 25 8 pcs. nut M3 I printed it in ABS but I…
Remix of original model sanding mouse to add indents for 3/4 inch velcro strips.
Case for Tester LCR-T4, 3D print, material ABS, 4 pieces M3 x 5mm, PC conector, 6 * 6 * 5.5 micro switch. Created by dzino.
This 3D-printed Server Rack Cable Management Velcro Mount offers a simple yet effective way to keep your network and AV cables organized. Designed to fit standard server rack configurations, this mount allows Velcro straps to pass through…
Sortimo L-Boxx wall mount with velcro mount ; 50mm velcro I recommend my second design..see Remix
Creality CR-10 Smart Fulcrum Printhead This is a custom, complete, fully reversible replacement of the printhead, featuring a full-metal MicroSwiss hotend, a Bondtech LGX-Lite in directdrive setup, dual part fan (and fanducts), hotend…
Hi ! I finally received my tester ESR T4 from Aliexpress, I started looking for a box for this small circuit. After having printed and tested several boxes, I was disappointed because they were either difficult to print or not very…
I watched a german youtube video about 3D printed velcro and i had the idea to make it sew on. The nice part is that the other half because it is made out of plastic is glueable on everything. So one side is connected to cloth and the…
TP-Link Tapo C200 / C210 mount with flat side to mount on objects using velcro or glue. I remixed this part do attach the Tapo C200 on my cable surface mount box using velcro. Printed with support. Remix based on TP-Link Tapo C200 various…
Simple velcro anchor that fits on a 3M small command strip. I made these with velcro one wrap ties in mind, but a thin zip tie might work as well. Use these for cable organization where you don't want to screw into something Printed with…
Stackable sorting trays with lids to secure them for storage or travel - This is modular to fit your needs! I made these mainly to help keep my work space clean and organized with the possibility to expand them as my needs change in the…
I am not a fan of cable ties and prefer to use Velcro. So I have designed a simple holder. This model is designed for a Velcro width of 2cm. It can be attached with either double-sided tape, glue or a simple screw. It's a little frickelic…
This handle is to help organize and hang any cords or hoses. It's a hassle to carry a 100 feet hose. With the handle, I can easily hang the hose and keep a cleaner space. I got the Velcro or hook and loop strap from Harbor Freight. It's…
EN - Description Wall decoration inspired by the MIG-29 Fulcrum fighter jet. The model is designed as a flat decorative element. It is optimized for 3D printing without the use of supports. The multicolor design is achieved by changing…
Used the model on https://www.thingiverse.com/thing:797733 and just added the space for the lid for easier access to the battery when needed. the lid was from https://www.thingiverse.com/thing:694790. I hope you like the models! If you…
Wanted to hang my portable 1080p monitor on the wall using 3M velcro mounts.
Since I did not manage to find an existing print which fit my LCR-T3, I created mine. I used 3 M3x5 screws to secure the tester, and a M3x12 screw to create the thread in each hole. Due to poor board layout, a fourth screw cannot be used.…
I designed this under-desk mount for ½" Velcro straps . I mounted them with M3 wood screws.
This is a simple case for LCR-T3 ESR component tester. Print Settings Printer: Prusa i3 Hephestos Rafts: No Supports: No Resolution: 0.20 Infill: 20 Category: Electronics
I guess you know that the Wltoys 12428 steering mechanism has lots of 'not good' traits, like getting stuck in sand or mud, wobbling, and having a low turning angle. Most of my RC cars have bell crank steering, so I decided to upgrade…
Since I didn't like the designs of the other ones, and since my PCB seemed slightly different I opted for designing my own. In order for other people not to waste more time, I've included the Fusion 360 design files, so you can tweak it…
Basic Info Uses 2.92 g per Anchor at 15% infill I've printed in both PLA and PETG both work fine. Tips if planning to mount by screw If planning to mount it with the screw, be careful when tightening it, I over did it with a drill and it…
The clip can be slotted into 2020 extrusion from the side, and then rotated to lock them in place. They can be quite stiff to get in, I used an adjustable wrench. I've included a 3mm hex wrench socket that may also work to turn them into…
Uses 50 mm velcro tape on the bottom to “stick” to the car trunk. Recommending to print with more heat-resistant filament, for example PETG or ABS
