Printable velcro tapes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Introducing 3D printable sticky tapes that can securely connect two objects, yet can be easily separated when needed.
- Ocena
- 4,4 / 5
- Polubienia
- 161
- Pobrania
- 509
- Wydruki
- 5
- Wyświetlenia
- 2984
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Hey guys, after tons of updates I would like to introduce you a printable alternative for hook & loop.
Voilà!
Easy to use - you just need to stick it on flat sides to whatever you need removable and hanging (I used a glue gun). Also, feel free to cut into smaller pieces if it is necessary.
Test prints were printed on MK3S+ with 0.4 nozzle and 0 Z lift settings which I highly recommend to prevent stringing.
I also tested this print in my Ender 2 pro where was necessary to change the minimum travel after retraction is at least 1mm because of a small number of retractions.
After updating the setting retraction changes to:
SO IT IS IMPORTANT FOR other printers with Bowden extruder check this setting!
