Liczymy pasujące modele…
Version 5 Features: SNAP TOGETHER DESIGN MOVING SIDE-RODS ROTATING WHEELS MAGNETS FOR COUPLING TRUCKS (OPTIONAL) NO SUPPORTS FITS COMMON KIDS WOODEN TRACK (20mm between wheels) WORKS WITH THOMAS WOOD SERIES, TAKE ALONG, AND TAKE N PLAY…
Screw together modular wizard's wand with three different tops. Prints without supports
Technical Description: Modular Mountain View Wall Art This project consists of a detailed mountain view, divided into 9 primary segments , optimized for printing with an Ender 3 S1 3D printer. The entire model spans approximately 1 meter…
See parent model (below)
Screw-Together Sieve & Funnel A two-piece sieve and funnel for clean bottle-to-bottle liquid transfer. The sieve screws directly into the funnel, making the parts lock together as one rigid unit. This prevents wobbling and keeps liquid…
This is a necklace of a couple hugging together. You can wear both at the same time or separately. One for one lover and one for another. Also among family or friends to show your bonds. I hope you enjoy It. Important: You can print this…
Great idea for a steam deck stand converted to work with a ROG Ally X with a case. Also added space to store the iClever folding keyboard and trackpad. Case: https://a.co/d/hkceOmL Keyboard: https://a.co/d/dfiGJ1Z
My father-in-law's dog broke the button on his clothes. He wanted to fix it without pulling out the sewing machine, so I designed this snap together replacement! All you have to do is put the left over loop of yarn through the two holes…
Snowflake napkin holder makes any table look a little cooler. Prints flat and snaps together. Looks good in a single color, or make it pop with some color swaps. Tight and loose versions included depending on your printer tolerances.…
This is a direct edit of the “__raspi_module_1_01-SIF_OLED.stl” module from the Modular Snap Together Raspberry Pi Case , and the only things i changed is 1: I made the OLED cutout bigger to allow you to mount it forwards or backwards,…
for https://www.printables.com/model/300603-gridfinity-screw-together-baseplate
Annealing Tray for Sunlu E2 Filament Dryer This is a custom annealing tray designed for the Sunlu E2 filament dryer. The stock annealing tray takes up both filament roll slots, but with this version you can anneal parts while still drying…
Designed for multi material (MMU) printers. Visit our website: https://StarLabs3D.com Our YouTube: https://www.youtube.com/@StarLabs3D Help support our design work by visiting our referral links: Upland referral (virtual property trading…
The Clip-Together Snowman!!!! this is a fun Christmas toy, gift, or ornament fully customizable from short to tall to saying hello mix up the colors! WARNING: LET COOL AFTER PRINT! Assembly: separate color: the buttons fit into their…
~Better Together Series 💘 The Better Together series keeps growing with this adorable duo of love-struck piggies 🐷💖 All animals in the collection are fully compatible and can be mixed & matched freely . Magnets are optional, but highly…
This is a two-piece clip-together display frame designed to showcase clay imprints (hands, feet, or paws) while keeping the clay accessible and protected over time . The frame is specifically sized to sandwich a 110 × 110 mm clay tile…
I wanted a card tray for Skyrim the adventure game and some others so designed this in Fusion. It's made for regular sized poker cards with sleeves (66.5mm wide). You can see it fits sleeved cards from Nemesis. The trays snap bottom to…
Print your own Shin Kai that can glow! Model snaps together firmly. Recommend using PETG to avoid warping that occurs with PLA and printing by object instead of by layer. I made this flat instead of tapered and curved to avoid the need…
Designed for single filament printers. Visit our website: https://StarLabs3D.com Our YouTube: https://www.youtube.com/@StarLabs3D Help support our design work by visiting our referral links: Upland referral (virtual property trading…
Added the slot for the top flex cable. Improved the walls for holding the LCD.
Instead of all the parts being bunched up these parts are separate. This should help because one of my parts failed.
My Ultimaker 2+ started jamming a ton and I discovered that the extruder lever had warped at the bearing mounting point causing it to bind. Using the UM open source files I modded the lever arm to assemble with screws - making everything…
This is a compact, 2-part drying rack designed to hold water bottles upside down for faster, cleaner drying. I designed this specifically for SodaStream bottles, but it works well for standard water bottles, baby bottles, and sports…
This bolt and nut holds together the Label Dispenser, made by wbworks.aus https://www.printables.com/model/433010-label-dispenser Use 0.16 layer height!!!
This 3D‑printed Easter egg is a fun, functional, and customizable design made of two parts—a top half and a bottom half —that screw together securely. It’s perfect for storing small gifts, candy, chocolate eggs, surprises, or whatever you…
Gravitrax Tracks Double Drop 0.4n 0.12mm PLA Prusa MK4S 13 Minutes Layer Height: 0.12mm Walls: 3
This roadbed provides you a snap-together approach at layout creation for Märklin (Marklin simplified) Z gauge trains. Each section is embossed with the track part number it is designed for, has bi-directional locking tabs at both sides,…
The egg can be printed without supports but the egg holder needs supports. created for Easter competition (2026). only recommended used together as normal eggs don't fit in egg holder. Thank you if you download! Don't forget to view my…
Please roast me if this does not fix the issue for you
This is still work in progress. Fully customizable, including # of magnet slots and hinges Please let me know if certain parameters cause the model to react weirdly, make sure to give the parameter used so i can recreate and find source…
Design Concept This piece is a nostalgic return to the classic children's rattle, with a modern twist in its interlocking modular design. The vibrant colors and simplistic round form aim to engage children both visually and kinetically.…
No supports needed. Designed for single filament printers. Visit our website: https://StarLabs3D.com Our YouTube: https://www.youtube.com/@StarLabs3D Help support our design work by visiting our referral links: Upland referral (virtual…
Edited Prusament Spool to have wood texture and screw together
Added a hole as well as a recessed nut seat for standard SMA (female/male) connectors. This allows for easy connection of antennas, Low Pass Filters (LPF), or dummy loads when experimenting with software like rpitx. As noted on the model:…
I was looking for fidget toys to print, when I came across this one: https://www.thingiverse.com/thing:2667803 Star hinge fidget toy by chkno. I downloaded the 8-pointed start and printed it out. But it was fused together, and breaking it…
Stackable Semi-Open Front Storage Containers This is a collection of differently sized containers and accessoires which form a storage solution for all your small parts. All containers can be snapped together in different combinations to…
This is just a simple screw-together container, shaped like a peanut-butter cup. Feel free to print it and share it with your friends.
This is a 3D-printed .50 BMG scale replica. It is design according to NATO specifications. The bullet screws into the casing so they can be printed different colors and don't need glue to be assembled. Check out my new fidget spinner and…
These are 3D-printed 9mm Parabellum scale replicas. The bullets screws into the casing so they can be printed different colors and don't need glue to be assembled. I design full metal jacket, hollow point, and frangible bullets that all…
Represent the Rainhill Trials of 1829 in your collection, by making this snap-together kit of the famous Stephenson's Rocket locomotive! All parts should snap together without the need for glue. Depending on the printer/settings/filament,…
Print with default settings layerheight 0.2 15% infill Inner height of the container is 25 mm and the diameter is 80 mm For a single/top container you should print a lid For the following container(s) you should print a connector All…
This little snap-together reindeer is a perfect give away or present for christmas. It's very easy to print and looks quite good. I downloaded this model from Thingiverse. Design by shink. https://www.thingiverse.com/thing:3213535 Print…
Kapla-sized planks with a carefully placed hole, to create a slide-together structure. I provide a customizable OpenScad script, so anyone can change the size of the pieces (I provide an example that is fully compatible with Kapla…
Thanks to @Yanev for their nice working parametric model of a tool box! I remixed it to "huge" for holding a ViewSonic LCD Projector, and added a carrying handle, made for two (2) M5 x 30mm screws plus two (2) M5 nylock nuts. The latches…
NOTHING BRING A GROUP OF @$$HOLES TOGETHER FASTER THAN..., sign Category: Signs & Logos
This is a two-part cover for standard laptop CD/DVD optical drives (9mm), in case you have a dead laptop sitting around and found a few optical disks. Fully compatible with the front-bezel made by JPMakesStuff . You can use a cheap cable…
Insert for game Flock Together: Birds of a Feather Eggspansion (base game + expansion) I present to you the insert for the game Flock Together + Birds of a Feather Eggspansion. Everything fits in one box. Take advantage of this and print…
Compatibility: This case design is compatible with Raspberry Pi's 2B/3B/3B+/4. It may be compatible with other models, however, these were the ones I was personally able to test it on. Two Top Depths: (01/06/2022) The top half is now…
This is a rivet for the strap on Crocs to replace broken ones. I print on an angle. The female part is flat to the buildplate (two parts touching) but the male part need rotating back slightly to reduce the support required. You can print…
Needed to run an 6mm ethernet cable around the outside of the house, following a 7mm coax cable that was cable clipped in the wall. To save nailing more clips into wall this cable clip allows the 6mm ethernet cable to hang off the 7mm cable
I wanted to make a christmas tree that could sit on my shelf, so I made one I could screw together. The peg is inserted into the star, and then the screw. You can then stack the tree parts, and screw them together. That's all there is to…
Snowflake napkin holder makes any table look a little cooler. Prints flat and snaps together. Looks good in a single color, or make it pop with some color swaps. Tight and loose versions included depending on your printer tolerances.…
Dreiteiliger Ständer für Barcode Scanner. Zum Unterschied von meinem geschraubten zweiteiligen Modell ist dieses dreiteilig und wird zusammengesteckt und mit Klebstoff gesichert. Gedruckt mit PLA 15% Infill und 2 Perimeter. ……………………………..…
Update August 7 2026 I printed the box and lid in ASA and the snaps didn't connect and hold, so I've made a version (labeled "Battery Leveller Fixed") with tighter snaps that worked well. The lid fits very snugly and is easily pried off…
these slip together brackets can be glued to any objects, allowing them to slip together
I needed 2-1/2 reels for a small Aiwa tape recorder, like the kind used in the TV series “Mission Impossible”. I found a model here for 3 inch tape reels, and modified it. The two halves snap together, at least to align for gluing. I have…
Simple and easy snap together paint tube holder 4 tiers high Can print more of the middle part to make it longer to hold more paint tubes.
Print out individual sides to construct your own 20mm x 20mm dice. No glue is required! Just print and snap together! The sides are made so that you can mix and match. Need a die that has 1:6, 1:2, or 1:3 odds? Print out the sides that…
Inspired by the dual color prints where the parties slides together, I wanted to design a candy cone which can be printed with a single color printer. Which I did =). And because it's/was christmas I want to share the file! Version 1 is…
Gears print separately. Before snapping the gears onto the pegs, use an exacto knife to cut/clean out the cross sections for each peg. At some point I'm going to revisit this design to incorporate a pegboard and more gear shapes.
A reinforced and extended version of ericman314's snap-together maze. See the original for assembly instructions and printing tips. The maze plate and knobs are printed in PLA in my version. The base, cams, and linkages (2 each) are…
Tenkara Spool Keep your tenkara lines tangle free and ready to go. This spool has a a ton of notches, hook keeps, and magnets to accommodate however you want to store your line, on the rod or off, wound from either direction, hook on or…
For smaller print beds, layer 2 of the Frosthaven Insert by Leon_H. This is a snap-together version (avoids glue).
Transform your broken or missing ceiling light cover with this practical solution that anyone can install! This cover is designed for a cable with of 5.5 mm. The hole in the center is 6 mm, which results in a tight fit. Key Features:…
Just added end holes to link these end on end. This way you can make them full width of your drawers with the filament pins locking them to each other as well as your grid.
If you use a three tables LACK, here is a part, which I modelled from original top parts, for connection bottom and middle table.
This is a remix of a remix. The original is https://www.printables.com/model/460355-bear-headphones-holder
Hi All, Thanks Sneaks for this amazing set of models for the raspberry pi. I made the Raspberry Pi 3B+ version with a custom module cover with a honeycomb grill to allow the air to flow around the heatsink nicely. All fits and prints…
Clicky Cubes are a quick and easy print. Just print two first to check the fit—if they’re too tight or loose, adjust your flow rate by ±1% and you’re good to go. Once you’ve got it dialed in, go nuts and make as many as you want! Stack…
0.2mm layer, 2 walls, 10% infill Possible to print without AMS/CFS, just add a print pause after the top layer.
I never have had much success in gluing PETG together for structural reasons, so I have designed this really simple clip to supplement the holding strength. Thanks for the original designers of both the U-Channel mod and original LED…
A great Wall Art of "better together". Do not forget LIKE and to upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) Inspired by a sticker
This is a Pi 4 base plate and latching mount is for Sneaks' “ Modular Snap Together Raspberry Pi 2B/3B/3B+/4 Case w/ OLED & Fan Options ”. This only includes the base for Sneak's case (Latching_mount_4D_LATCH_CASE_BASE.stl), so you will…
This is a direct edit of the “__raspi_module_1_01-SIF_OLED.stl” module from the Modular Snap Together Raspberry Pi Case , and the only things i changed is 1: I made the OLED cutout bigger to allow you to mount it forwards or backwards,…
So far it has dropped my CPU temps from ~65C down to low 30C temps (with / without fan respectively). Fan module is designed so that the 3007 fan is snap in place and have space to use the terminal slots. I used PETG but PLA should work…
Simple snap together case for a Raspberry Pi 4b. Snaps together. No screws required. Raspberry PI logo fan holes with a 30mm sized fan and for access to the IO pins. Infill does not really need to be more than 15%, 10% might be good…
Modular Snap Together Raspberry Pi Case Module Modification Modification: Module → Snap in Fan and Terminal Added hexagonal pattern fan grille to module. Modifications I have included the full CAD model done in Solidworks. The assembly…
After getting a Divoom Pixoo this week and having great fun with it, I thought why not do a 3d printed version… so I did! This will keep adults and kids amused for hours..hopefully! There is a base sized 16x16 wall hanging board as…
Snap together remix of Cyberpunk 2077 - The Relic by tomvh Supports are needed for the center part (named Magenta Part in the files, but shown here in yellow). You may need to clean up the prints a bit to get a good snap together fit.…
Summary This is a modification to the Modular Snap together Raspberry Pi 2B/3B/3B+/4 Case by user @Sneaks . This model only works with the deep rail modules of this model. It is meant to interface with 2020 and 4040 mounts serving as a…
Fused together Xbox Series X|S controller holder was an idea that I wanted to make. It came out easily printable, fun and very easy to use, hope you like it.
This is a remix of Sneaks' Modular Snap Together Raspberry Pi Case Module with a 4010 fan and OLED . This simply adds two buttons which can be used to soft shutdown the Pi or pausing a print (using the “ Physical Button ” plugin for…
This is a remix of the Wailmer Watering Pail made by InducedRug.
Ended up losing the pool to my dog and decided to print a new one. Not an exact match to the original but it fits well and looks similar Category: Playsets
just like with the last Lid Screw-Adapter I wanted this to be as rigit as possible. The cheapo 20L Barrel is fine for the price but I wanted to test a barrel with thicker walls. Its just a bit to flimsy for my taste… Long story short: I…
150mm, 100mm, 50mm slide together project box. A work in progress. The top and bottom are the same, just print two and slide them together then put on the ends. Pop holes in it as needed. I might make some custom sizes later with rails…
Here is a fun Easter related model. The two pieces screw together to form an egg. There are two versions of the inner piece, one with a hole in the center to hide money and one without. The mode is similar to the popular “impossible”…
A 3D design of a hand holding a beer! 🍻 The best way to keep your hoodie strings together. Hope you like it! If you enjoy my creations and would like to support my work, a coffee is always appreciated! ❤…
Small decorative hexagon shaped bowl. If you want a few of them to be aligned, you can join them with the printable pegs.
Mounts for VESA 200 for 1x Raspberry Pi 4 and 2x Raspberry Pi 4 Improvement: Instead of "for 1x Raspberry Pi 4 and 2x R
![Modified [Choose] Overlay Tiles Split Up Version, Snap-Together](https://media.printables.com/media/prints/1133698/images/8554736_2e7b2ada-832b-4cb5-a5e9-cfe6efbc2ecb_ac8fbef2-e657-40e3-8812-08d31f52062f/screenshot.png)
