1 / 4
Ultimaker 2-3 Extruder Lever Arm - Screw Together Upgrade
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ultimaker 2-3 Extruder Lever Arm
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
My Ultimaker 2+ started jamming a ton and I discovered that the extruder lever had warped at the bearing mounting point causing it to bind.
Using the UM open source files I modded the lever arm to assemble with screws - making everything much stronger.
I used ABS with higher infill. Use M3 x 10 flat screws or #4 x 3/8". Prints without supports.
This should work for the 2, 2+, 3.