1 / 13
Slot-Together Bottle Dryer with Drip Tray (SodaStream Compatible) — zdjęcie 1
1 / 13

Slot-Together Bottle Dryer with Drip Tray (SodaStream Compatible)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Slot-together bottle dryer for SodaStream & more. Prints flat in 2 parts without supports. Includes optional drip tray.

Ocena
0 / 5
Polubienia
3
Pobrania
13
Wydruki
0
Wyświetlenia
70
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution

This is a compact, 2-part drying rack designed to hold water bottles upside down for faster, cleaner drying.

I designed this specifically for SodaStream bottles, but it works well for standard water bottles, baby bottles, and sports bottles too. It prints in two flat parts that simply slot together, making it easy to print without supports.

Features

  • Slot-Together Assembly: The dryer consists of two cross-sections that slide firmly into each other. You can easily disassemble them to store flat in a kitchen drawer when not in use.

  • Optional Drip Tray: I have included a separate base plate that catches water droplets, keeping your countertop dry and water-stain free.

  • Compact Size: At just under 10cm wide and 6.7cm high, it is unobtrusive on the counter.

Print Settings

  • Material: PLA, PLA+, or PETG.

    • Note: If you wash your bottles with hot water, PETG is recommended for better heat resistance.

  • Supports: None required. The parts are designed to print flat on the build plate.

  • Infill: 15% (Grid/Gyroid).

  • Walls: 2-3 walls.

  • Watertightness (Tray Only): For the drip tray, I recommend 3-4 walls and slightly higher print temperature to ensure it is watertight.

Assembly Simply slide the two cross-sections together. No glue or screws are needed. Place the assembled cross onto the drip tray, and you are ready to dry!

Happy Printing!

Tagi