1 / 13
Thing ico LCR T4 Tester (123 1111) Easy Print Housing — zdjęcie 1
1 / 13

Thing ico LCR T4 Tester (123 1111) Easy Print Housing

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Thing ico LCR T4 Tester (123 1111) Easy Print Housing

Ocena
3 / 5
Polubienia
13
Pobrania
109
Wydruki
1
Wyświetlenia
718
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

Hi !

I finally received my tester ESR T4 from Aliexpress, I started looking for a box for this small circuit.

After having printed and tested several boxes, I was disappointed because they were either difficult to print or not very ergonomic.

So I decided to design a box well suited for me to this little circuit.

This work has still represented 12h of labour and 4 test prints.
But i'm happy with the result :
No supports needed ! Print like a charm in PLA.
There is a cable management under the battery location (see picture)

I hope that like me, you will find it easy to print and practical to use.

You need :

1 LCR T4 tester (Pin configuration 123 1111)
Be care, they are severals models...
See my pictures for reference.
Here is the exact model :
http://s.click.aliexpress.com/e/nG7T8AU

1x Countersunk head screw M3 x 5 for the battery box
http://s.click.aliexpress.com/e/c84ZTCbO

2x M3 x 10 normal head screws for the main case
3x Simple M3 nuts
http://s.click.aliexpress.com/e/crbqSwSM

4x Self tapered screw M1.7x 3 or x5 to hold the pcb
http://s.click.aliexpress.com/e/TONrIxI

3x Banana socket 4mm (drilling diameter 12mm - max length 31.5mm)
http://s.click.aliexpress.com/e/c8w590za

Happy Printing !
Renaud

Tagi