Thing ico LCR T4 Tester (123 1111) Easy Print Housing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Thing ico LCR T4 Tester (123 1111) Easy Print Housing
- Rating
- 3 / 5
- Likes
- 14
- Downloads
- 111
- Makes
- 1
- Views
- 722
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Hi !
I finally received my tester ESR T4 from Aliexpress, I started looking for a box for this small circuit.
After having printed and tested several boxes, I was disappointed because they were either difficult to print or not very ergonomic.
So I decided to design a box well suited for me to this little circuit.
This work has still represented 12h of labour and 4 test prints.
But i'm happy with the result :
No supports needed ! Print like a charm in PLA.
There is a cable management under the battery location (see picture)
I hope that like me, you will find it easy to print and practical to use.
You need :
1 LCR T4 tester (Pin configuration 123 1111)
Be care, they are severals models...
See my pictures for reference.
Here is the exact model :
http://s.click.aliexpress.com/e/nG7T8AU
1x Countersunk head screw M3 x 5 for the battery box
http://s.click.aliexpress.com/e/c84ZTCbO
2x M3 x 10 normal head screws for the main case
3x Simple M3 nuts
http://s.click.aliexpress.com/e/crbqSwSM
4x Self tapered screw M1.7x 3 or x5 to hold the pcb
http://s.click.aliexpress.com/e/TONrIxI
3x Banana socket 4mm (drilling diameter 12mm - max length 31.5mm)
http://s.click.aliexpress.com/e/c8w590za
Happy Printing !
Renaud