1 / 3
Sew on Velcro / Annähbarer Klett — zdjęcie 1
1 / 3

Sew on Velcro / Annähbarer Klett

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple 50x50mm velcro strip with holes to sew on. Simpler Klett mit Löchern zum Annähen.

Ocena
0 / 5
Polubienia
44
Pobrania
106
Wydruki
0
Wyświetlenia
675
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Engineering
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I watched a german youtube video about 3D printed velcro and i had the idea to make it sew on.

The nice part is that the other half because it is made out of plastic is glueable on everything. So one side is connected to cloth and the other side on everything else. So i made a connection part to connect cloth with everything. 
The part is 50x50x3mm. The holes are 2mm. 

I know 3D printed velcro is not new but this part is.

Print settings:

Nozzle size: 0.4mm
Layer height: 0.2mm

Infill: 5%

support: no
build plate adhesion: no

Ich habe ein youtube video (besagtes Video oben) über 3D gedruckten Klettverschluss geschaut und hatte die idee bekommen es annähbar zumachen.

Der Clue dabei ist, das die andere Hälfte ja auch aus Plastik ist und so an allem dran geklebt werden kann. Damit habe ich eine Seite am Stoff festgenäht und die andere Klebe ich auf irgendwas und kann die verbinden.
Das Teil hat die Maße 50x50x3mm. Die Löcher haben den Durchmesser 2mm.

Ich weiß, dass 3D gedrucktes Klett nicht neu ist, aber genau dieses Teil schon.

Druckeigenschaften:

Düsengröße: 0.4mm
Schichhöhe: 0.2mm

Fülldichte: 5%

Unterstützung: nein
Druckbettadhäsion: nein

Tagi