1 / 3
Sew on Velcro / Annähbarer Klett — image 1
1 / 3

Sew on Velcro / Annähbarer Klett

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€0.67 – €0.82 net (excluding VAT)

For file: Sew on Velcro Annahbarer Klett v4.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.74 excluding VAT (range midpoint).

Weight reported by the author
4 g
Print time reported by the author
1 hr
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

A simple 50x50mm velcro strip with holes to sew on. Simpler Klett mit Löchern zum Annähen.

Rating
0 / 5
Likes
44
Downloads
107
Makes
0
Views
681
Reviews
0

Updated at source:

Model information

Category
Engineering
License
Creative Commons — Attribution — Noncommercial — Share Alike

I watched a german youtube video about 3D printed velcro and i had the idea to make it sew on.

The nice part is that the other half because it is made out of plastic is glueable on everything. So one side is connected to cloth and the other side on everything else. So i made a connection part to connect cloth with everything. 
The part is 50x50x3mm. The holes are 2mm. 

I know 3D printed velcro is not new but this part is.

Print settings:

Nozzle size: 0.4mm
Layer height: 0.2mm

Infill: 5%

support: no
build plate adhesion: no

Ich habe ein youtube video (besagtes Video oben) über 3D gedruckten Klettverschluss geschaut und hatte die idee bekommen es annähbar zumachen.

Der Clue dabei ist, das die andere Hälfte ja auch aus Plastik ist und so an allem dran geklebt werden kann. Damit habe ich eine Seite am Stoff festgenäht und die andere Klebe ich auf irgendwas und kann die verbinden.
Das Teil hat die Maße 50x50x3mm. Die Löcher haben den Durchmesser 2mm.

Ich weiß, dass 3D gedrucktes Klett nicht neu ist, aber genau dieses Teil schon.

Druckeigenschaften:

Düsengröße: 0.4mm
Schichhöhe: 0.2mm

Fülldichte: 5%

Unterstützung: nein
Druckbettadhäsion: nein

Tags