9,062 models
Halloween themed board game inspired by Connect 4. Print instructions Print two sets (25 pcs) of discs in different colors. The top of the game must be glued together with acrylic glue. How to assemble? Insert the bigger piece of the top…
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for one variant
Some not required material (in my opinion) was removed to decrease printing costs and duration further. Main features: Two magnets for each segment with press fit (6x2mm). Minimized material costs, the gridfinity boxes are fixed only by…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
MODEL DETAILS For use with ‘Revo Connect’ nozzle holders . A bracket for your Prusa MK3. Should also work with MK2 printers. Slots into the top of your frame, with the E3D logo facing forwards to avoid Z-axis collisions. RECOMMENDED PRINT…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
Splicing tool 1,75mm +2,85mm - filament welding - filament connecting If you like it --> press like it :-) Use your last meters to create a tool, with which you will never have last meters again! Instead of last meters, you will have…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for PETGSource material: PET
This is my modelling of a standard snap-fit garden hose connector, combined with a 1-inch BSP screw fitting - as often used to connect to garden water pumps. (Note: the hex bolt for tightening was sized to match the outer diameter of the…
Print approx. €1.48–€1.80 excl. taxPreliminary estimate for one variant
Hose quick connector male to ¾" BSP commonly found on UK garden hose fittings e.g. Hozelock, Gardena etc. Add one standard o-ring 2.5x11 (OD: 16mm, cross section 2.5mm) to make leakproof. I printed in standard PLA settings, supports…
Print approx. €1.05–€1.29 excl. taxPreliminary estimate for one variant
Einfaches Tool zum öffnen von MC4 Steckverbindungen / Simple tool for opening MC4 connectors Gedruckt mit 0,1mm Layerhöhe, 3 Wände und 15% Infill / Printed with 0.1mm layer height, 3 walls and 15% infill
Print approx. €0.52–€0.64 excl. taxPreliminary estimate for PETGSource material: PET
Recommend organic supports under topmost overhang. O ring borrowed from another cheap fitting I had around.
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant
Cute little containers with hinged lid and dovetail groove to combine them to a complete small part storage system. I designed this originally for my beloved girlfriends jewelry but discovered very quickly that these little containers…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET
Introducing the SP Connect STEM Spacer, designed for ultimate durability and precision fit. This model is compatible with any type of plastic (PETG recommended) , ensuring versatility in your printing process. For optimal strength and…
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for PETGSource material: PET
EN: Box for 2 battery AAA size - model is in two versions (for parallel or serial connection). Print without supports. The electrical part needs: - 2 pieces anode battery contact AA/AAA type 228 (12x12x0.3 mm) - 2 pieces cathode battery…
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
Warning: This model is no longer up-to-date. Please use Version 2 instead. Link: https://www.printables.com/model/534077-connect-4-3d-version-2-board-game Connect 4 3D: Stack beads on 16 pins, win by making 4 in a row. Easy to print.…
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for one variant
I was asked to add connection possibility for the original whistle, printable without supports.
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant
A simple MC4 solar panel connector opener with keyring hole. The "claws" at not parallel and should therefore fit any brand MC4-connector. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PETG Category:…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
A 3-dimensional version of four in a row. Danger: very addicting! Rules: you play inside a 5x5x5 cube, so the maximum height is 5 pieces. Two players take turns, you win by having 4 pieces of your color in a row: diagonally, straight, all…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
To prevent jumper wires with the ubiquitous 0.1" DuPont connectors from inadvertently being pulled out. Fast and simple to print, for 1 to 8 connections, in both standard lengths. Print at 0.2 mm layer height, without supports or brims,…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
I have fond memories of playing with connectable shapes that looked similar to these as a child, and so I decided to try to make a version that could be 3D printed. My goal was to create something that was easy to attach and pull apart in…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
I recommend set printer to print 4 perimeters (due to self-cut screws). You will need M2.5x10mm conic head screws to connect bottom and top part together.
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
Its just a replacement for a broken microphone mount. As it is, is easy to print in PLA or PETG. Suitable for FIFINE microphones . Additional hardware may be needed. In fact, you should keep the original threaded nut that can be extracted…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
This is a remix of my single frame mount of the E3D Revo Connect modular system. It's a four module inline nozzle holder bracket. It slips into the lower frame of the Prusa Mini/Mini+/MK3/MK3S/MK3S+ and be installed on the left or the…
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for one variant
*DISCLAIMER: This is a Work In Progress Project, so STL can change I want also to thank Perinski for the idea of the design of case, which is simple and it inspired my design, I suggest you to watch his designs on the following page:…
Print approx. €4.32–€5.28 excl. taxPreliminary estimate for PETGSource material: PET
Ikea's Lack tables are very versatile and there is a lot you can do with them. In my case, I put one upside-down table and on it, another Lack table. I searched online for a connector but I had a requirement to not use screws (because I…
Print approx. €2.46–€3.00 excl. taxPreliminary estimate for one variant
This is a servo connector compatible with the Skywing RC connector system. Designed to be printed in PETG with supports on "build plate only". Fits standard Servo connectors, i used the powerbox servo plugs and sockets. The connector…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for PETGSource material: PET
Another convenient way to store and access your Revo nozzles using the E3D Revo Connect modular system. I remixed the great original sidebox first created by KalleKnall and then remixed by dotson90 with Mesh sides and added a front mount…
Print approx. €4.64–€5.67 excl. taxPreliminary estimate for PETGSource material: PET
This is a small box to take up the Adafruit CSI or DSI Cable Extender Thingy for Raspberry Pi. (https://www.adafruit.com/product/3671). The bottom part can be fixed somewhere using a cable tie. I use it on my MK3S to connect camera cables…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET
A connector to make a pentagonal prism out of straws. Uses the white part of the straw from boxed milk.
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
A connector to make a pentagonal antiprism out of straws.
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
NOTE: Scale STLs by 1000x in PrusaSlicer (Weird Bug) Simple interlocking nozzle holders with a snug interconnecting fit, and loose fit between the printed part and the nozzle. Labelled versions (0.8, 0.6, 0.4, 0.25) and unlabeled versions…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
An extension to the popular "maple" blocks.
Print approx. €1.47–€1.79 excl. taxPreliminary estimate for one variant
The screw and nut are designed to fit the holes under the table: The connector must be attached to the 100mm tube of the vacuum cleaner: For the connector, you can use two 40x10x10mm neodymium magnets (or four 40x10x5mm). I used these…
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for PETGSource material: PET
JetKVM 1U Rackmount with connection to a Ubiquiti UCG-Ultra/etc. Rackmount Option which i used before and be able to replace my empty right side. There are more options out there to combine it to. Use 2 M3 inserts and 2 M3 screws to…
Print approx. €2.85–€3.48 excl. taxPreliminary estimate for PETGSource material: PET
Connector pipe diameter – 9.5mm Layer Height: 0.2mm Material: PETG Openscad model requires NopScadLib Assembly #1 Stick the two printer parts together with connecting rod, through the protruding side sections, the connecting rod must go…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
11/8/24 - v2 Update Increased the size of the ball & socket on the hinge for a stronger more reliable hinge Modified the design of the snap fit latch to be more secure Fixed a few issues in the Fusion360 sketch where I wasn't properly…
Print approx. €4.49–€5.49 excl. taxPreliminary estimate for PETGSource material: PET
Portable Five-In-A-Row Game - For Kids And Adults, Strategy Game With Colorful Pieces Compact & Portable - size makes it perfect for travel and on-the-go entertainment Interactive Strategy Game - Classic five-in-a-row gameplay promotes…
Print approx. €7.14–€8.73 excl. taxPreliminary estimate for one variant
Repairing a broken bed with a carpenter's joint. Connectors provide strong, aesthetic and professional connections of various elements, even structural ones, primarily wooden ones. A large number of well-thought-out holes allow them to be…
Print approx. €1.61–€1.97 excl. taxPreliminary estimate for PETGSource material: PET
This is a combination tool to help disconnect the PTFE tube and the AMS cable. I had seen some small separate versions, I wanted to make a combined tool that I can hang from my wire shelving unit. There are also holes to hang from a peg.…
This is a set of connectors to magnetically attach dust collection hose to tools. This allows you to easily swap one hose between multiple tools without having to adjust hose clamps. I saw another one on Thingiverse, but it required…
Updated 2025-03-01 - fixed a few bug, improve transition logic, added threads (beta). OpenSCAD project to create vacuum hose connectors. Intended for generating connections that would allow connecting vacuum hoses and tools of different…
Introduction I'm sure everybody has seen the beautiful 30th anniversary PS5 Pro release . The USB-C cable housing they included for the cable was a very cool design, so I thought maybe us existing PS5 owners can also share some of that…
Here I made a game of Connect 4 fit inside of an Altoids tin. This is designed so that you can fold it down for storage, and when you're ready to play, you just place the game board in the slots in the base to keep it standing. The way…
English These couplings or connectors are used to join two corrugated pipe sections that are used in electrical installations. Model files are available for the common pipe sizes DN20, DN25 and DN32. I experimented a little and created…
Design This is a lightweight(under 14 grams) twist lock PTFE disconnect which uses (2) 6mmx3mm rare earth magnets(see below regarding actual thickness) to hold a locking position and (2) PC4M10 or (2) PC4M6 pneumatic connectors. I kept…
Feedthrough connector for WAGO 221-411 connectors. Perfect for going entering enclosures or going through walls with cord with up to 3 wires. There are three options of entering the connector from the “outter side” Corrugated tube…
I was working on wiring up some solar power stuff for a coworker and my big ol' mitts couldn't effectively disconnect the MC4 connectors. Decided I would rig something up to make my life easier. Maybe it'll make your life easier too.…
Use this to prevent damage to your Creality K2 Plus extruder's bowden connector, which may fail if the PTFE tube becomes loose from the cable chain and starts wobbling tearing itself out, damaging the connector teeth. Note: If you already…
2020 3Ways Connector CUBE Corner Bracket for ITEM 2020 Profile Available in two versions: Blank M4 Treaded Suitable for: https://www.item24.com/en-il/profile-5-20x20-natural-37003#description All our designs are free to download and use.…
I made it in the image of a traditional Japanese lantern. Necessary items in addition to 3D printer products A 60*120 piece of paper “ precisely " cut from A4 paper LED tape light Power supply Please refer to the image for how to…
Have fun with this 4 in a row game. Designed to have an absolutely flat kit card. Play at home, on the journey or use it as a souvenir. Printed with layer height: 0.28 Print the game pieces twice with different colors. Update 2023-08-02:…
The kids wanted a Connect Four game they could take with them, so I designed this version with a tray that latches shut and includes storage for the checkers. Print instructions The game board prints standing up. So, if you're using a bed…
E26/E27 bulb sockets cost $3 to buy, this costs 0.30 cents to print! That's 90% savings to help justify your 3D printer purchase. I found Salvatore's 3D model fit the threads of light bulbs very well, however I wanted a more traditional…
Set of two watertight covers for protecting MC4 connectors from dirt and corrosion. Parametric, open-source, free. Designed using ShapeScript . Features Actual MC4 locks — not just plugs or caps, these covers attach the same way MC4…
Resolution: 0,2 mm Infill: 40 % Material: PLA
Holder for Type 2 charger cable where the cable come in from the side, better fit how the cable is looped around the holder. You may want to print this with supports. Edit: I've added a picture of the areas that you may want to have…
Bambu AMS Disconnect Tool remix without text and holes
The vinyl caps that I have had for different SMA connector radio devices I have were always falling off. I made these with the correct ¼-36 thread so that they stay on and don't fall off. Print with thin layers for the best detail on the…
This will attach to your SP Connect Handlebar Mount Pro (4 pegs version) Been using it on gravel ride on a few rides with no issues. Printed with PETG for strength. UPDATE: The new V2 version has slightly thicker walls to prevent shearing…
Printable 40 pin connector for RaspberryPi. You just insert separate cables (goldpin connectors) inside, put locking bar in and voila. You made yourself a working 40 pin connector and got rid of single plug cables. Never connect to wrong…
Take your Monster Jam play to the ultimate level! Hook up your 1:64 scale Monster Jam trucks with these custom link adapters to create an incredible chain or "train" of beasts. They latch firmly onto the front and rear of each truck,…
The plate should have the correct space around the connector. Because it is drawn with official measurements. Just substract the plate from your object and the connector is integrated in your design. The cut is also intend to be cut of…
Hi, this is a simple wall mount for a Samsung One Connect Box. Print it 2x and slide in the OCB. Hope you enjoy!
This is a simple housing for 9 and 25 pin D-SUB connectors. Other sizes might follow. I needed such a housing for a current project and I couldn't find any I liked. Currently, the housing is strictly symmetrical. So you just need two…
A scaled-down version of the original. Many bathroom products come with pumps to extract the bottle contents, but the tubes on the bottom of the pumps don't reach all the way to the bottom of the bottle. Thus, after the pump stops…
This model is connectable unlike the original so you can customize the size.
Heads up, read the comments. Let me know if this works with stock cr touch location. Send me. Pm or write in the comments. Thank you. Because the S1 pro has the led bar above, having the chain run along the axis could end up with the…
When I first got into this hobby of Lego trains and 3D printing I found a lack of custom parts available for download. All the builders seem to use 3D printed drive train parts and they are available for purchase from various websites but…
The model's pretty straightforward: a template/test for a snap fit connector. This can be integrated into any of your projects. It's quite strong actually! Use the f3d model to customize. No supports! Your 3D printer should be able to…
Description System for the magnetic connection of machines and fans with 150mm / 6 inch hoses. Can be used e.g. for laser cutters, soldering stations, welding work, vacuum cleaners, shop vacs or planers. All connections and adapters are…
3 Pin Male Plug IEC320 C14 Chassis Panel Power Inlet Socket Connector I designed this thing in order to have the most detailed 3d Model of my CNC electronics enclosure. It is fairly accurate and should do for future CAD models that need a…
Updated models, and new designs added after dozens of revisions! I made these to fit a ¼ (.25) inch dowel rod from the hardware store that can be picked up for $1.25 in lengths of 4 feet. Holes are made slightly oversize, but crush ribs…
(deutsche Beschreibung weiter unten) English: Description: This practical adapter allows you to connect two detergent bottles to cleanly and completely transfer the remaining detergent from a nearly empty bottle into a (nearly full) one –…
Recently my kids were using the original connect 4 slider piece as a sword and broke it. So it became my duty to make a new one. I made this so it would need minimal supports, (touching build plate only.)
Use the .3mf files if possible, as the “union fitting nut G 1 1-2.3MF” contains a modifyer to have 100% infill in the critical section of the part. If you print from the stl, make sure the shoulder that holds the hose connector is printed…
Uses the original model and adds in a USB sized handle to make for easier storage and purchase when in use.
For most of Smoby children playhouses My design holds tighter than original - it's easeir to screw and more difficult to unscrew - for kids safety There is 3 versions of the screws modeled - please compare with photos before print Skechup…
A 60 degree connector for LEGO train tracks (not DUPLO). Updated with a fixed .STL (this was one of my first designs and there were some small overhangs I hadn't noticed). No supports needed, but there are small ones built in at the end…
I needed a system that allows me to quickly connect and disconnect the ventilation duct of my air conditioning to take advantage of the same ventilation duct and occasionally connect my Prusa Core One or my Creality K1C (coming soon) to…
English Recently I created model files for the straight connection of two corrugated conduit sections in the electrical installation. See also https://www.printables.com/model/1292339-corrugated-condiut-connectors . I didn't think bend…
Shelly BLU Motion Wall Mount Bracket with adjustable Snap Fit Connection - Staffa di montaggio a parete con attacco a scatto regolabile Hardware: 2 pcs M3 x 5mm Phillips Pan Head Screw DIN 7985 or similar 1 pcs M3 x 10mm Phillips Pan Head…
Protective caps for Li-Po balancing connectors - JST-XH 2.5mm. Available sizes: 2S, 3S, 4S, 5S Additionally, more sizes can be made by editing the original STEP file (slicing in the middle and adding/subtracting 2.5mm). Please print a…
This is a snap connector and pin to connect the parts of the spice rack (https://www.thingiverse.com/thing:4356449) together. They replace the need for a screws, washers, and/or book binders as mentioned in the original design. I have…
This is one of the first models I made for 3-D printing. These tools are used to break MC4 connections by simultaneously pressing two tabs that hold the connection together. Print with the ring flat on the print bed, and cut off the…
Introduction I've made another thing for my PRUSA, a robot, but in this case, it's not just a toy. What characterizes the vast majority of my projects is their practical and functional application. In this case, what I've decided to call…
Introduction: ReFill PLA is manufactured for usage with re-usable master spools. Print your own spool. This filament reduces your carbon footprint significantly as packaging waste is reduced to an absolute minimum. Find out more about…
THE THREE-SECTION CONNECTOR ALLOWS THREE TUBES TO BE CONNECTED INTO A STRONG CONSTRUCTION
i've seen a very good model from WalkerRaiden, i've created my own faster to print and easy tool for keeping filaments aligned. 0.2 with 15% infill is enough for a good result.
This is half of a cable spool, I use it for underware cable management on larger and heavier cables. I noticed that the hook in the main model was only available for 25mm multiboard, so I recreated and adapted. It's made in openscad so It…
Opened up the full hexagons so can be use for connector inserts for CANBUS, fans, ERCF, PG7, & filament sensors. For inserts use these: https://www.printables.com/model/790873-voron-24-skirt-connector-insert-for-canbus-fans-er
Created a variation of the AFA Deburring tool holder to work with Multiboard and utilize the snap connector. There are some push-fit options out but I like the direct application and single print of the snap connector option for things I…
The regular connect 4 is a super fun game … but I (and I believe more people) wanted something more after a while … I created this version of Connect 4 where you could play the regular rules OR you can play the twisted version. In the…
Tool holder for Power Bits 40pcs with Connectors. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 152,59mm W - 101,00mm H -…
This would probably be better printed vertically to make the controller interface teeth as strong as possible. I recommend lots of perimeters and little infill. I did not print this model, but it is the same as my angled versions.
Don't really know how to describe all of that… I needed a way to connect my gutter to my rainwater collection tank because I can't just leave it open. mosquitos go in and reproduce like crazy and after that the all neighborhood is…
If you're a retrogamer or a collector of retro tech, or if you like high quality audio and invested in a receiver with external speakers and a subwoofer, you've probably run (or know someone who ran) into the problem of RCA connectors…
This model is inspired by the babyphone mount by Bosal. A solution to mount the babyphone of a friend at bed. I created the part from scratch to add the following features: The edge of the bed is 20.5mm wide: easy… Screwing the M6 without…
This mount is for fixing two WAGO 221 3-way connectors in the kitchen-block of my campervan. Designed for mounting on a 2020 extrusion, but you can fix it anywhere. I added the Fusion360 file, so you can customize it.
Two models of generic USB-C right-angle connectors/extenders/port-savers that can be used in rough Boolean operations for 3D-modeling. USB-C Receptacles are: 8.5mm x 2.5mm x 8mm USB-C Plugs are: 8.5mm x 2.5mm x 7mm Type 1 model: purchase…
The step file is designed to hold two MC4 power connectors and keep them from slipping out. I printed vertical in ASA for and then epoxied it to the back of a portable solar panel. If you need to hold more or less connectors, I have…
I was annoyed by the huge key, which prevent the cover from closing. With this smaller key, the cover still doesn´t close completely. But for me that´s enough to easily load my motorcycle to my Knaus Sport & Fun caravan. Print Settings…
The plate should have the correct space around the connector. Because it is drawn with official measurements. Just substract the plate from your object and the connector is integrated in your design. The cut is also intend to be cut of…
The clickfinity baseplates by James Boone are amazing https://www.printables.com/model/719455-gridfinity-clickfinity-baseplate-w-connectors , but they are not designed to be flushed with a vertical surface. (You might also want to…
