Pace Tubing Connector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Connects 7/32" (~5.5mm) I.D. vinyl tubing to Pace soldering station.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 27
- Makes
- 0
- Views
- 307
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Connects 7/32" (~5.5mm) I.D. vinyl tubing to Pace soldering station.
I have no idea where this tubing came from, but I had it on hand and I needed to connect it to my Pace solering station. It had a larger inner diameter (I.D.) than the tubing that came with the station, so I could not use the provided connectors. It actually took longer to print than it did to whip up the 3D model in FreeCAD.
NOTE
I did eventually snap my first connector because of the print orientation. So I reprinted it on its side. I allowed my slicer to add supports everywhere, knowing it would fill the tube. But to my surprise, I was able to grab the filler with a pair of tweezer and pull it right out!
Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: Yes
Resolution: 0.1mm
Infill: None
Filament: MatteForge PLA Orange
Notes: Printed with a 0.25 mm nozzle because it's so tiny. UPDATE – my reprint was made with a 0.4 mm nozzle, and it worked just fine.