Pace Tubing Connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Connects 7/32" (~5.5mm) I.D. vinyl tubing to Pace soldering station.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 307
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Connects 7/32" (~5.5mm) I.D. vinyl tubing to Pace soldering station.
I have no idea where this tubing came from, but I had it on hand and I needed to connect it to my Pace solering station. It had a larger inner diameter (I.D.) than the tubing that came with the station, so I could not use the provided connectors. It actually took longer to print than it did to whip up the 3D model in FreeCAD.
NOTE
I did eventually snap my first connector because of the print orientation. So I reprinted it on its side. I allowed my slicer to add supports everywhere, knowing it would fill the tube. But to my surprise, I was able to grab the filler with a pair of tweezer and pull it right out!
Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: Yes
Resolution: 0.1mm
Infill: None
Filament: MatteForge PLA Orange
Notes: Printed with a 0.25 mm nozzle because it's so tiny. UPDATE – my reprint was made with a 0.4 mm nozzle, and it worked just fine.