Counting matching models…
EN: Box for 2 battery AAA size - model is in two versions (for parallel or serial connection). Print without supports. The electrical part needs: - 2 pieces anode battery contact AA/AAA type 228 (12x12x0.3 mm) - 2 pieces cathode battery…
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
JetKVM 1U Rackmount with connection to a Ubiquiti UCG-Ultra/etc. Rackmount Option which i used before and be able to replace my empty right side. There are more options out there to combine it to. Use 2 M3 inserts and 2 M3 screws to…
Print approx. €2.85–€3.48 excl. taxPreliminary estimate for PETGSource material: PET
Use this to prevent damage to your Creality K2 Plus extruder's bowden connector, which may fail if the PTFE tube becomes loose from the cable chain and starts wobbling tearing itself out, damaging the connector teeth. Note: If you already…
Resolution: 0,2 mm Infill: 40 % Material: PLA
Description System for the magnetic connection of machines and fans with 150mm / 6 inch hoses. Can be used e.g. for laser cutters, soldering stations, welding work, vacuum cleaners, shop vacs or planers. All connections and adapters are…
For most of Smoby children playhouses My design holds tighter than original - it's easeir to screw and more difficult to unscrew - for kids safety There is 3 versions of the screws modeled - please compare with photos before print Skechup…
Shelly BLU Motion Wall Mount Bracket with adjustable Snap Fit Connection - Staffa di montaggio a parete con attacco a scatto regolabile Hardware: 2 pcs M3 x 5mm Phillips Pan Head Screw DIN 7985 or similar 1 pcs M3 x 10mm Phillips Pan Head…
I've made a right angled exhaust pipe for the Creality K1 for use of a ID 38mm pipe for those wanting to vent their printer due to smells & VOC's The stock fan isn't that powerful so 38mm is still fine for air flow to remove some smell &…
I needed a place to mount my ZWO ASIAIR on my ZWO FF65 APO, same type as the Askar 65PHQ. The original CNC machined part is expensive and hard to get. Other 3D-printed alternatives were sold for exorbitant prices, so I started to design…
Do you have your EKET shelves free-standing? Did you forgot to buy the connection fittings? Or do you only need a few, while the swedes only sell packs of 12? This model is your solution. Print on side for best layer orientation. Print…
Verbindungsbox für vier MC4 Stecker. Deckel wird mit vier M4 Schrauben verschraubt. Hierfür müssen Gewindeeinsätze eingeschmolzen werden. Auf einer Seite ist ein Einlass für eine Wellrohr EN25 und auf der anderen Seite sind zwei Einlässe…
The covers to protect the DIN connections of the first diving stages are attached, in addition to the cover to protect the threads of the scuba tanks.
Replacement hose connector for the Hoover Evolve Pet Elite The latch part on mine broke due to fatigue so the hose would no longer stay clipped in. Printed this in TPU because it's basically impossible to flex any other plastic onto the…
This jaw mechanism features a simple rotational design, allowing the jaw to be fully movable for natural articulation. It consists of two pieces on each side: a socket attached to the head and a connector attached to the jaw. The design…
1" DN25 cross connection for pipes with BSP thread. Fits great with my other pipemodels!
After using the EVA 2.4 for a long time I realised, that if I want to move forward with the acceleration tuning, I need a specialised, low-weight and robust printhead. This model is made for following components / configuration: LGX Lite…
Please see Wheim's original model for a detailed description of the model and its design: https://www.printables.com/model/432213-drinkmate-bottle-dryer-and-wall-storage-solution Also note that this remix is intended to be affixed to the…
This part is a needed for Rancher 4x4 as the holes in the original end has different dimensions. The Bumper parts can be download there under this link…
Screwdriver holder for Multiboard. Uses "big thread" connection. Includes 12.5mm long connector for offset panels and 6.25mm for flush panels.
Replacement connector for wooden train tracks (glue recommended) My design acts as a wedge so it should hold itself in place the further you push it in. If the connection is still loose and depending on the damage or size of the hole, I…
Just some ventilation parts i needed
TESTED WITH CR-10 Succsessfull - Use 1kOhm for R3 https://www.youtube.com/watch?v=-I5_oMVDs4Q Additional tests are required. Need to make sure the output is reliable and stable. I updated the circuit and did a new PCB Layout. V1.6 REV0 is…
I've got these Monoprice Surround Sound speakers and I needed to keep tiny fingers from playing with the cables of my rear speaker pair. I'm not using the rear atmos connections, so the part labeled “top” covers it completely. Left a hole…
Connection elements for desk with profiles 40 x 20 mm. Contact me if you need customized versions.
The workmen had left the gas connection box to my house open. So I looked for a key, but as I couldn't find one, I ended up creating one myself on fusion 360. I live in Belgium and don't know whether this key is universal or used…
This is a quick and dirty concept for the finger claws that enables them to be hot glued onto gloves with their tips cut off. Just the left side. I don't recommend printing this model. It is just to illustrate the idea. I don't have the…
I designed and made a connection bearing for rolling wash of a developing tank. This connection bearing connects the developing tank and the motor, making it convenient to wash the film. The connection between the developing tank and the…
Informations Designed a Adapter Plate for my Mikrotik wAP AC Access Point to mount on any Camera Equipment. I use it with a Small Rig 10" Arm and a Manfrotto Super Clamp. Work really well and is very stable. You need some small screws to…
Do you have your EKET shelves free-standing? Did you forgot to buy the connection fittings? Or do you only need a few, while the swedes only sell packs of 12? This model is your solution. Print on side for best layer orientation. Print…
A simple Battery holder for multiple AA batteries. I created this in MS 3D Builder as I wanted to experiment with my leftover batteries and small electronic parts. You need to buy a set of battery contacts / battery springs like this from…
I printed these in PLA at 100% infill. I hope that people who are looking for these ,and have a 3D printer will be pleased with them.
Shelly BLU Motion Wall Mount Bracket with adjustable Snap Fit Connection - Staffa di montaggio a parete con attacco a scatto regolabile Hardware: 2 pcs M3 x 5mm Phillips Pan Head Screw DIN 7985 or similar 1 pcs M3 x 10mm Phillips Pan Head…
The adapter allows a universal mount (4 screws) to be used on a twists-and-locks mount. The Twists and Locks mount is used in some OEM applications , including Nissan, Ford, GM , etc. I recommend ABS or ASA to be used for this part.…
1" DN25 cross connection for pipes with BSP thread. Fits great with my other pipemodels!
I bought skimmer from Aliexpress for above ground pools and it should be mounted on pool with hard sides. I have above ground pool with only linen and there was leak at the bottom of skimmer between rubber sealing and linen. This gasket…
This jaw mechanism features a simple rotational design, allowing the jaw to be fully movable for natural articulation. It consists of two pieces on each side: a socket attached to the head and a connector attached to the jaw. The design…
ESP32 C3 SuperMini pendrive case for USB connection Made in Autodesk Inventor (ipt file included)
Compact Case for MMDVM Dual Hat (PCB-Only) Give your MMDVM Dual Hat Hotspot the perfect standalone home! This case is designed exclusively for the HS Dual Hat PCB — the Raspberry Pi is not housed inside . I run my Dual Hat connected to…
It’s a remote control chicken on a skateboard. It is rad. It’s name is Hennessy, a Lohmann Brown . Actually there are two of them. Count Bockula is a Master Grey and a Goofy-Foot. ABD? Not this. So lock in fam, cause we’re loosening the…
Wago 221-420 (10 Connections) DIN Rail mount. Prints without support
I 3d printed a Nut but the filament still scraped on the pneumatic connector. I added a print in place ball thingy. I don't know the technical term. I printed it in PLA. The nut should be on top when printing. It's my first ever design…
This model is quite specific to a requirement I had while fitting out a new room with a surround sound system. Maybe it's useful to someone else too though. This is a wall mount plate designed to take an RCA-style ("phono") connector so…
The workmen had left the gas connection box to my house open. So I looked for a key, but as I couldn't find one, I ended up creating one myself on fusion 360. I live in Belgium and don't know whether this key is universal or used…
I like Driftrotor's Voron V0 Bed Fans & Connection Mount for Fysetc CNC Bed but I wanted to add breakaway for NeoPixel cable used for also Driftrotor's Fysetc CNC Bed Stealth Front With Neopixel . For the housing for the 3 pin JSTs, I…
Two halves of a heart that you can connect to the other half. Dvě poloviny srdce které lze spojit s druhou polovinou.
Modified to offset the CoPrint Chroma head to the right so that you do not loose printable area on the bed. Also uses heat set inserts for Chroma head mounting.
A hexagon with a Skadis hole pattern that works well with Skadis accessories that can fit inside a single tile. The tiles can be connected together with the included connector to form a pattern of multiple tiles. Connecting the tiles…
Printed using Sunlu 90A TPU at a 0.1 mm layer height.
A simple tool to fasten a 1/2" BSP (1/2 duims) connection to a faucet in a (ofeten) difficult to reach location. Printed in PETG with 20% honeycomb infill. It is strong enough to securely thighten the bold to the faucet.
Enhance your 3D designs with this free, printable M30 screw/nut and hole connection! This set includes both male and female objects and is easily scalable down to 25%. You can use this model freely, with no attribution required. A key…
I decided I wanted a better looking filament rack. These are designed to be used with 1/2" copper tubing but, you can use wooden dowels or whatever you want! Printed on Bambu Lab X1C with PLA.
Replacement connector for wooden train tracks (glue recommended) My design acts as a wedge so it should hold itself in place the further you push it in. If the connection is still loose and depending on the damage or size of the hole, I…
I created this adapter for kitchen exhaust/smoke extraction because I couldn't find this size anywhere, the problem being that in the kitchen I already had a rectangular hole with these measurements
Bottom corners from Original Prusa i3 MK3 ENCLOSURE without slots for plexiglass: G-code for PLA
Children's train Budapest like train connection (gyermekvasút csatlásszár) pls like PRINT EVERYTHING 2X! (If you want to connect them)
Redesigned on 08/04/2026 check: I want to prevent the bowden tubes to enter the Space Pi box and avoid known issues. This is a design thought to modify the Space Pi4 dryer without irreversible changes to the box. No need to drill, glue or…
The original wall anchor piece only lets the screw to hold/squeeze the bottom half of the part wall anchor printed part against the wall which means it's if you pull on the base plates, it can break there, leavinf the top half on top of…
A simple box, 13 x 7 cm with a lid and two 4 mm wide holes to allow cables enter and exit. Main motivation behind the design was to prevent my cats to play with my LED controller cables.
Handy little helper that attaches permanently to the 16mm nut of a gas hose to eliminate the need for a wrench. Using this tool for my CADAC Safari Chef.
Design Concept This flexible connection carrot is primarily designed for children's early learning, aiming to attract children's attention through brightly colored interlocking segments and stimulate their hands-on and observational…
You can combine the ramp and track from the two designs. I have no idea how it fits with the original. Print as shown in the image, clip side up. Infill 30%, gyroid, layer height 0.16mm
Previous model worked but had some failures, mostly after drying cycles on the space pi. Also, I was not able to remove the 3 inserts left (without risk of damage), so I redesigned to adapter to better fit my needs. I kept the original…
Some SEAFLO boxes do not contain the 25 mm connection. I have also included my freeCAD file to make it editing easier.
Made it to replace one on my Kahles binoculars. Sliced X&Y scaled at 99% just in case. Screws in perfectly.
Needed to whip up something to be able to direct-feed some TPU for a few projects that need to finally get done. I already had some PVC EMT tubing from a previous project, so I remixed the elbow that I used for the corners, and created a…
I needed a bungee connect that I could use with a carabiner for a over head, hard to reach canopy bar. The hook design worked good until there was slack on the bungee. This eliminates the worry about having to replace a hook.
The PTFE tube that goes in the extruder keep coming out, so I made a modification from the Mini Extruder already modified by Deeps. I know It gets a bit in the way of the tension bolt, but who uses that anyway… Hope it works for you if…
This remixes the multiboard plier holder to support push connections in case you already have a snap installed.
Verbindungsbox für vier MC4 Stecker. Deckel wird mit vier M4 Schrauben verschraubt. Hierfür müssen Gewindeeinsätze eingeschmolzen werden. Auf einer Seite ist ein Einlass für eine Wellrohr EN25 und auf der anderen Seite sind zwei Einlässe…
Allows you to connect HSW elements in angles. Includes a section for a large plate with 11 cells and one element that can be cloned as many times as you need.
The La-Z-Boy battery pack has a cover for the connection between the battery pack and the chair. Mine broke so I designed this replacement.
Mutter: Layerhöhe 0,16 mm / Infill 100 % / kein support / Slicingtoleranz “EXKLUSIV” / Material PLA+ Klemmteil: Layerhöhe 0,2 mm / Infill 100 % / kein support / Slicingtoleranz “EXKLUSIV” / Material TPU TPU A95 von 3DJake Dieses Filament…
SRH-775 Antenna connection seat Video in Bilibili https://www.bilibili.com/video/BV15ksie7EQz/
I designed and made a connection bearing for rolling wash of a developing tank. This connection bearing connects the developing tank and the motor, making it convenient to wash the film. The connection between the developing tank and the…
Uses 12mm OD tube / M12 screw push in fittings. Goal here was to design an outlet that doesn't require watertight seal since this is difficult and unreliable long term. Bottom convex element captures water flowing around the screw, though…
Just added supports to the feet as they all quickly broke off the one I gave to my son.
SÖKETLİ BAĞLANTI İPİ SOKETLİ BAĞLANTI HALATI حبل توصيل مع مقبس VERBINDUNGSSEIL MIT STECKDOSE
full assembly with real movements
double garden hose connection - raccord double tuyau d'arrosage type gardena Paramètres d'impression 3D, printing setting petg - layer 0.15 - bed 85°C - nozzle 240°C
I needed specific angled connector pieces for my in-house mechanical ventilation. Since the original parts were made from ABS, I decided to design and print the pieces; I have made a variation of adapter pieces (please visit my account)…
I needed specific angled connector pieces for my in-house mechanical ventilation. Since the original parts were made from ABS, I decided to design and print the pieces; I have made a variation of adapter pieces (please visit my account)…
I needed specific angled connector pieces for my in-house mechanical ventilation. Since the original parts were made from ABS, I decided to design and print the pieces; I have made a variation of adapter pieces (please visit my account)…
Informations Designed a Adapter Plate for my Mikrotik wAP AC Access Point to mount on any Camera Equipment. I use it with a Small Rig 10" Arm and a Manfrotto Super Clamp. Work really well and is very stable. You need some small screws to…
Karcher WD6P Vaccum Cleaner connection Tool pipe length : 20mm Diameter : 30 to 39mm (On STEP file per diameter) + 22 + 44 Freecad source file in attachement Print it in PLA
little box the hide the connection of 2 cables, in my case it fit some domino style connectors. Easy to print and assembles with m3 bolts
A simple prop dagger with a printable pin connection for assembly. if you would like to increase or decrease the size you will have to scale all pieces equally. -Enjoy!
Made a connector for our Miele Vacuum since it broke on one side, and I couldnt find this part online. Print under 45 degree angle so the parts where the screws go are stronger.
I was looking for a coupling to connect the coils to the MMU3. Unfortunately, there are only connection blocks available individually or for the flat connection. The 30° block with a coupling thread on both sides was the best I could find…
Arrows to make connections between locations in the Arkham Horror LCG. One side marks bidirectional connections, while the other side marks unidirectional connections. They can be printed with two colors (as shown in the photos) if your…
This is a "prototype" to test how big & heavy I could make the top portion with the blades. The pins are pretty thick and should be printed flat on the bed for more strength. perfect for a fun project or cosplay. if you wish to increase…
Note the top/bottom of the spacing for the connection points in 140mm from center to center, For the sides its 95 from center to center. The Male slides have a extrusion of around 3.5mm so they sick out a bit. trim that if you want some…
Movable connection fixing an ever breaking point of that cheap thing called Paloma. Just cut a clean end of the broken pipe - the green part goes to it.
Testet Material PLA.
A case for the iPhone 13 mini which you can attach to any Lego Technic build with the Technic liftarms attached to both of the ends on the case. Quite easy and fast to print. Printing: Infill: 100%, does not really matter because the…
This is a generalization of my Phone Stand with power plug. This stand allows the user to plug both USB and Audio cables into the bottom of the phone. Unlike my first phone stand, the USB connector is not secured to the stand. This makes…
After several weeks of use I lost (allegedly broke in the course of back movement of the boat), part of system of release. I made by it replacement for it. It is 8 mm thick instead of 3mm as at an original detail. Instructions I printed…
Alle Dateien können, so wie sie sind ohne Support gedruckt werden. Der Brim ist schon dran, damit man ohne viel einzustellen alles auf einmal drucken kann. All files can be printed as they are without any support. The Brim is already in…
