1/2" PVC EMT Tee fitting - slip connection
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fits 1/2" PVC EMT pipe (the grey stuff typically used for electrical. Designed for on/off connections, to be reused
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 58
- Makes
- 0
- Views
- 153
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
Needed to whip up something to be able to direct-feed some TPU for a few projects that need to finally get done. I already had some PVC EMT tubing from a previous project, so I remixed the elbow that I used for the corners, and created a tee that is a pass-through for the 2-ended section of the fitting
The flat part that prints on the build plate makes a perfect base to create a platform, and the orientation I'll be using these fittings, is shown in the pic above. I removed the hole from the elbows, and made the entire fitting closed off, to keep out any detritus, but if you need that opening for a 4-way fitting, the creator of the original model I used has one that works quite well.
This is for 1/2" tubing. I do not have any other size tubing that I needed these for, but I would suspect that these would scale nicely. If I can remember, I'll update this with a pic of the platform I knocked together.
Cheers!