Counting matching models…
One of the cheapest options for dust collection in home woodworking shops is to use readily available and cheap PVC drain pipe. The problem is that most dust collection fittings are not made for these pipes (though that seems to be…
Very useful when you want to attach a Coroplast prop to a PVC pipe to hold it straight. I use this on tombstones and other standing Coroplast models for LED pixels (WS2811) Printing: Filament: PLA Infill: 15-20% Nozzle: 0.2mm No supports…
You can use this at the base of your Coroplast model to hold a PVC pipe that will keep your model straight. Works very well with my other model https://www.printables.com/model/1084357-pvc-pipe-holder-for-coroplast-props Printing:…
This is was originally designed to make a target stand utilizing standard conduit or PVC pipe. v2 will work with any 3/4in (19.05mm) diameter conduit or PVC tube v3 is a larger version that works with up to a 1.35in (35mm) diameter tube.…
5mm and 10mm spacers to clip onto a 1.5 inch pipe to keep filament rolls from moving around when storing them. This can be used with the Ultimate Filament Dry Box. In the picture the black colored spacer is the original.
Adapter for 7 inch felt filter bag to attach to a 1 1/2" PVC connection for use as a pool slime bag or dust filtration. I made this adapter for this 7" X 32" felt filter bag: https://a.co/d/hf8bH57 This had a plastic collar that this…
Joints to create a PVC door You'll need one 25mm M3 screw to attach the hinge. Hinge-A PVC-Corner-A.stl PVC-Corner-Frame-A.stl Hinge-B PVC-Corner-B.stl PVC-Corner-Frame-B.stl Please note: This is designed for 1/2" CTS (Copper Tube Size)…
A simple end cap with a threaded male end to go with another female open connector to attach and close a 4in (can easily be scaled up or down) PVC pipe. edit: Have added the stl file as well per request.
Silicone tape was used to reinforce all connections. Ended up being quite stable but your mileage may vary- I take no responsibility for your reptiles' safety. More parts in CAD below, but they aren't tested so make sure to measure…
This 3 Way Internal PVC Pipe Connector has been designed to be used with 20mm PVC pipe to make some FPV gates (in particular tiny whoop gates but I'm sure you could make full sized gates just by leaving the PVC pipe longer) This model has…
Prints on Prusa Mini in PETG. Adapts the pretty huge, odd-shaped hole in the Starlink Mini antenna base to a ring accepting PVC pipe with 42mm outer diameter. Did not take a picture of an acutal print - this model is the adapter between…
designed these so i could quickly setup and take down pool noodle style gates for practice and they work great. for stacking gates, they are designed with time, cost and durability in mind i use 2' long 1/2" rebar and in the middle i take…
This is my second version of a projector mount utilizing ~21.5mm PVC pipe meant for outdoor use. This version is stronger, more stable, and more versatile in terms of the ground you place it on. I've only tested with the VANKYO…
A bracket for mounting 3in PVC pipe. The bracket is designed to work with 1/4in bolts and nuts and 1/4in Tapcon screws (for mounting to the wall). There is also space for 1/4in washers under the bolts and screws. It should work with…
Occasionally, I need to make display backing or surrounds with ½" PVC pipe frameworks and with cloths draped over the pipes. These clips help secure the cloths to the PVC frames, and they are easily removed. There are two sizes of these…
I found the 8mm dowel to be too flimsy for the application, so I remixed the design to allow for easier-to-find and cheaper materials in Canada/USA. Repaired broken 3mf, as well as added multiple bore sizes to fit standard PVC/CPVC…
I was looking for this adapter everywhere, but all the options were either non-existent or too expensive where i live. Disclaimer: this is not a permanent fix, it should be only quick and short-term solution. This doesn't apply if you're…
A simple adapter which fits a male N-connector (or Type-N connector) and a 20 mm PVC conduit. I use it for making Meshtastic antennas, one of them can be seen installed on a solar node. Easy to use: Print in PETG, completely solid, wide…
I didn't want to buy a whole bunch of PVC connectors from a home improvement store and I didn't want to 3D print connectors based on the OD of the PVC. These parts are remixed from the following model because the original model did not…
tapa para colocar en la punta de una canaleta o caño de pvc de 100mm.
Need to secure a half-inch PVC pipe to a wall? I got you covered. This clamp can be bought at a hardware store, but if we wanted to do that, we wouldn't have these 3D printers. Drop a comment if you want to see me do more sizes. Let me…
Cut our some power outlets then there was missing 1m of these Tehalit 80mm veneers. I am planing to do some with a motive or flexible to put some like colored pearls in them to something like pixel art :)! Could get awesome! Happy printing!
in order to make full rack, you need to print 4 of the top/bottom pieces and 2 of the middle pieces. If you want more than just 3 levels, print more middle pieces. I printed with auto tree supports in pla. pvc size is for 1/2 inch pipe. I…
I made this PVC snap on mount holder to keep a homemade baby gate in place at the bottom of our stairs. Printed out of PETG with a .6mm nozzle .24mm layer height, 4 walls, top and bottom layers, and 15% infill. I'll scale it for other…
A tablet weaving frame-style loom that builds onto two two-foot sections of PVC. My preferred setup is to place the curved crossbar so the retaining screw holes are at the eighteen inch mark, leaving roughly five inches of pipe sticking…
Works to connect this back flow 2" (50mm) to a 32mm hose found in spa air hose. https://www.tubs.fr/fr/clapet-anti-retour-air-waterway-p-546.html https://spasupport.se/produkt/poolslang-pvc-32mm-05-m Glue between this part and hose, and…
This Clips onto 3/4" PVC and can be used to mount it in place with two screws. Printed from PETG 3 Walls 3 top and bottom layers, no supports. 10% infill. It seems to clip well onto most household broom handles, to keep them from tipping.…
Clip on PVC Pipe Hold Down Bracket for 1 inch PVC Pipe. Petg 3 walls, 3 top and bottom layers. 10% infill. No Supports.
This is an adapter for the osVAC Neo system that can be found here: https://www.printables.com/model/234267-osvac-neo-fusion-360-files I needed a 40 mm pipe for my extraction system in the workshop to connect a cyclone separator. The…
3/8-24 vertical / ground plane antenna mount cap for one-inch Schedule 40 PVC. Designed for portable amateur radio operation. The four tabs on the cap accept 6-32 hardware for ground radials. Four strips of aluminum were fabricated that…
This is a simple 5/8" Tee made to join two pieces of 5/8" PVC together. It’s meant for 5/8" outer diameter PVC (0.625"). The fit should be snug enough to hold well, but still slide on without needing to fight it (depending on your printer…
Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV Other Drone Accessories here: https://www.printables.com/@StudioMechanik/collections/3053772
Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV Other Drone Accessories here: https://www.printables.com/@StudioMechanik/collections/3053772
Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV Other Drone Accessories here: https://www.printables.com/@StudioMechanik/collections/3053772
Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV Other Drone Accessories here: https://www.printables.com/@StudioMechanik/collections/3053772
This mount attaches 1" PVC legs to a solar panel at a 45 degree angle. I use these on cheap rigid solar panels in the backyard to add lightweight stands that can be easily rotated and moved as the angle of the sun changes. The screw hole…
DIY Ventilation Chimney System - PVC Pipe Adapter Kit (Ø110 & Ø95) Description: A comprehensive set of 3D-printable components designed to build a professional-grade ventilation chimney. This system is engineered to integrate standard PVC…
Reducers and reducer-splitters for PVC/vent-hose, originally designed to attach to an AC Infinity butterfly backdraft gate for attaching to multiple 3D printer enclosures. R4: Only 4 way splitter. Experimental. Supportless attempt. All…
IMPORTANT These designs have been created with exact measurements. Due to material shrinkage and PVC pipe anomolies I highly recommend using the PVC test as a guide to what resizing you may need. In Creality Print I settled on 101.5%…
It's a pretty simple part. The base is the same diameter as the outside of the pipe and the four protrusions from it are a cylinder with a base the same diameter as the inner diameter of the pipe. The top of the cylinder was made a bit…
Stop buying $1,000 metal reels that rust or $50 plastic reels that snap under weight. This modular storage reel is designed to be the last one you’ll ever need. Originally engineered for the harsh, corrosive environment of a soft-wash van…
Simple and effective water nozzle designed for standard 20 mm PVC pipe. This nozzle smoothly reduces the diameter to 6 mm, creating a strong and focused water jet with increased range. Perfect for DIY water filters, pumps, or any setup…
Overview A clean, minimalist replacement for the standard plastic "pull tabs" on balcony and patio doors. This model specifically features the common 48mm screw hole spacing (center-to-center), making it a drop-in replacement for the…
Designed as a simple adapter to mount the top of a Yaesu ATAS-120 inside a 2" PVC pipe, while allowing a 1/2" PVC pipe to extend upward and protect the antenna’s upper wire. The 2" side provides a stable seat, and the 1/2" pipe acts as a…
Tired of PVC pipes sitting directly on concrete and collecting debris? This simple pipe cradle lifts your pipe slightly off the ground to keep things cleaner and better supported. My pool equipment has a bit of PVC pipe sitting on the…
Needed to whip up something to be able to direct-feed some TPU for a few projects that need to finally get done. I already had some PVC EMT tubing from a previous project, so I remixed the elbow that I used for the corners, and created a…
Screw-attach mast supports for a 1" PVC pipe. Designed for ham radio, but could be useful for other things.
I use a 3" x 12" PVC pipe to hold my various automotive funnels in the garage. Due to the shelves the previous owner installed, there's not much wall space to mount my PVC pipe on the wall. So, I designed this simple stand to stop the…
This was designed as a way to assemble a quick and cheap quarter wave vertical that will sit on flat ground. Add 3/4" PVC pipe in the holes, and attach your antenna element to the vertical part. Printed out of ASA on a QIDI Q2, the hole…
Model narzędzia - strug do rurek pcv
Overview The stock spike mount on Sonance outdoor satellite speakers (and similar form-factor landscape speakers) leaves the cable entry and threading exposed to the elements — dirt, moisture, and insects all take their toll over time.…
What? These are covers for the bottom hinges of VHS brand PVC windows. STEP files included in case someone needs to do any modifications. Why? Due to sun exposure, paint and scratches most of the hinge covers of my windows are either…
A base and end cap for a 2-1/2-inch PVC pipe. For use in a WLED project soon to be published. A link to the pipe we used. https://a.co/d/0am68ACm Category: Interactive Art
These are simple pegs that allow using PVC to create pegs / shelves on standard slatwall boards. I use them for hanging RC airplanes on the wall. Print with 7lines of wall and at least 10% TRIANGLES infill. Print laying on it's side to…
I slightly modified the original design to look a bit better. I printed three of them, and they all fit perfectly. Depending on print quality and window hole tolerance, the clip may need some sanding. 4 year update: After four years of…
Update 3/5/23: I have added a wider bulb holder for the IOM/US1M style boats. I also added Star 45 boat arms, bulb holder, plates, and clamps. Update 2/4/22: I added a longer pipe catch piece to allow the stand to go into “narrow” mode.…
I needed pipe straps for a project, but couldn't find the exact size I needed. So I figured as long as I'm whipping some up in CAD, I might as well make all the sizes. So here are some common sizes for Schedule 40 PVC pipe, and the…
I needed to replace an end cap on my NTF system so this is what I created. Works pretty well. Only concern I have is that it may cause too much water to pool but this is iteration 1. If anyone has a recommendation please let me know!…
I made five ceiling lights for above my kitchen counter. They're built using DN50 PVC pipes. I DIY-ed the mounts in white PLA, keeping them low-key. I 3D printed wire guides to center the tubes perfectly straight. The mounts have threads,…
I needed something to mount my laser level to hang some pictures up. The laser level comes with a mount that is basically a clamp with a couple points of articulation. It works great if you have something to clamp it to, but if not it's…
Inner hole is 61x61 to make shure it will fit. Also attaching FreeCAD file so you can modify it for your needs.
I did my best to recreate a ¾" PVC pipe T connector to use with the 150" projector screen frame that I made. I was learning Tinkercad and figured this would be an easy-ish first model attempt. I'll update if needed once I try printing it…
I wanted something like the reprack shelving, but I wanted to work with PVC pipe due to its availability in my area. These brackets were created for .5" PVC, which describes its internal diameter. The bracket holes are 22mm in diameter,…
Attach this to a 3/4" PVC Pipe and a single edge razor blade to make an algae scraper that can be as long as needed. Printing in PETG or ABS is best for use in water but PLA would work fine. No supports should be needed. I do 3-4…
I needed an adaptor to connect the end of my hose to a run of 1/2" PVC hose for my garden. Print in PETG for the best results. **This is a prototype and I have no idea about pressure loads or how it will hold up all season. ** I needed a…
Foot for 1 1/4in pvc pipe for vertical filament storage Printed screws. Threaded portion length in final use is about 1 1/4in long NUT JOB | Nut, Bolt, Washer and Threaded Rod Factory by mattala | Download free STL model | Printables.com…
(I'll get a real description in here shortly) Print four supports, they are used to provide a flat surface inside the pipe for the washers and nuts. Parts needed: Interface to pipe (choose one type) For normal support nuts: 4x #10-32 x 1"…
A simple 3 piece display stand for my Ragmop and Goose Diablo hand puppet. Print the Base and Head pieces, then cut a length of 1" ID PVC pipe (1 5/16" OD) as tall as you'd like it, slot them all together and voila! I printed PETG 3…
Guide à clipser sur une fenêtre PVC pour maintenir l'ouvrant. Guide to clip onto a PVC window to hold the opening.
PVC pipe connector use for my greenhouse. WIP Greenhouse arches are 40mm and 32mm for other pipes. I've used M8 bolt to assemble them. I've split all part in two because I've printed them in PLA and I will have to replace them because of…
Low-profile towel rack using a 1 inch OD PVC pipe. Use the middle support for longer racks, omit for shorter racks Screw holes are sized as clearance for #10 screws. I needed a temporary towel rack for my bathroom for about a year before…
FPVCycle Babytooth (https://fpvcycle.com/products/fpvcycle-babytooth-frame-choose-your-thickness) Canopies for everyone! :D Various versions with different Antenna mounts!
I needed an adapter to connect 1/2 inch PVC to 1/2 inch (16 mm) dripline. This fits Rain Bird dripline tubing. I just press-fit the connections together. With a 25 psi regulator, it seems to hold well. With full pressure press fit does…
This is a pretty simple, but really good filament holder / filament stand for your 3d printer of choice! I made this stand so I can easily swap filament on my Bambu Lab P1P while its inside an exhaust vented enclosure to deal with print…
A filter cap for a PVC pipe with diameter 40mm. There is a filter provided (cube infill + no bottom or top layers), but you can also use a mosquito net and screw it on. printed in PETG with 20% infill. Please leave a comment if you made…
My kids were building a Mario house form an old wooden doll house. We had some leftover PVC pipe laying around, so I made a matching endpoint for it, glued it on the pipe, and my kids had some fun decorating it :-) This version was…
Reduction for PVC pipe 110 mm to 2 x 50 mm and 2 x 50 + 30 mm. The model is made by ASA Filament (ASA Azzure film). ANYCUBIC Kobra 2 Pro Hot bed temp. 100°C Nozzle tem.p 245°C Infill 50% Layer thickness 0.18mm
Just a PVC Elbow Holder for exterior tap Installation, you will need 4 Expanders with screws to mount to the wall. It should fit any cold water 1/2 pvc elbow (as is standard)
My RV has a 6 inch OD rear round PVC “bumper” and hose storage. This helps me use it for storing and securing small items on top of it. They can also be used to mount a 5 inch OD PVC pipe. Includes FreeCad .Fcstd file. I printed in PETG…
Made to be screwed into a stud in the wall. I hung a PVC pipe between two of these to make a shelf for my filament spools. You could use drywall screws or any screw that's similar in size.
Presentoir avec tuyau PVC - Design modulaire pour ajustement de la hauteur - Diamètre 10 cms Display stand with PVC pipe - Modular design for height adjustement - 10 cms diameter
I needed a quick and simple way to connect lengths of PVC pipe together without buying expensive connectors. In my case DIN EN 61386-21 with an outer diameter of 20mm Printtips The files print without support and should be correctly…
125mm pvc tube plug. Its all. Recommended to glue with pvc glue or similar
I added the parameterized Fusion360 file. Just change the diameters under Modify→ Change Parameters for the inner and outer diameter of your pipe.
Attaches to a small hole on the rear rack (remove the little cover) and secures with a zip tie I printed in PETG without supports and it's a great tight fit
Instructions for printing: for bambu studio or other Slic3r slicer just open the 3mf file to change your printer and fillament settings for other slicers the scale factor for the og parts is 90.16% I used 15% infill with 2 wall loops…
Clips to hold seed pixels to 1/2" PVC. PETG works well. They are mainly used to keep the wire from flopping around in the wind. I would still use zip ties at the ends or wherever you need to take weight off the clips. Clip_Seed has a 5mm…
How many times at your desk did you need a back scratcher? Take a scrap piece of ½ in schedule 40 PVC, print this attachment and insert. A simple back scratcher to keep by your desk when you need to get to that one spot on your back! This…
Printed with Creality Ender 5 Plus. - 20% infill You need to work in the screw connector. So screw it on bit by bit. Or use some sandpaper.
i am trying to develop an pvc filter and designed this tube holder to hold my filter tube to the ceiling . i will place pictures and more designes the following weeks .
Needed a mount for some 1/2" PVC I got from ace. Used decimal inches because the imperial system is ridiculous and I refuse to use fractions when measuring things. Also I'm an engineer not an architect so decimals all day Customized…
This design is for most rack systems with 36-38mm. I designed it to use ¾ PVC pipe and ½ PVC pipe. I also added a honey cone design to decrease the filament needed and increase strength. You will need for this design: 3/4" PVC Pipe or…
Suporte para tubo de PVC para caixa secadora de filamento
Hi, l'm an amature radio operator avid transmitter hunter. The tape measure Yagi is a must for any t-hunter and should be in any armature radio operators kit. Building a tape measure Yagi is almost a right of passage. You can use a tape…
A minimal pipe flange for makers in a hurry, made for 40mm PVC pipe and 3mm wood screws.
This adapter mates a standard 90MM computer fan to 2" schedule 40 PVC. Two designs are included to facilitate both male and female PVC connections.
This backyard catapult can be printed on any size machine and uses PVC pipes to add strength and speed. If you're in a real hurry, use PVC elbows and only print the swing arm parts and T connectors. See my Youtube for pointers on…
