Adapter for 7 inch felt filter bag to 1 1/2 PVC for slime bag or dust filtration
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter for 7 inch felt filter bag to attach to a 1 1/2" PVC connection for use as a pool slime bag or dust filtration
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 90
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
Adapter for 7 inch felt filter bag to attach to a 1 1/2" PVC connection for use as a pool slime bag or dust filtration. I made this adapter for this 7" X 32" felt filter bag:
https://a.co/d/hf8bH57
This had a plastic collar that this print adapts to, so if you are using a different one, please check that it uses the same collar. You can do a test fit by printing just a short section of the outside radius using negative modifiers in your slicer or modeling just the part in CAD (step files included).
I printed the main body in TPU and the rest of the parts in PETG, but PETG should be fine for all parts. You'll then need 1 ½" PVC adapters, I used two male adapters and 8" of PVC pipe. The nut then secures one adapter to the main body. I only created the nut because the local big box hardware store did not have a nut to fit, so if you have one or can buy one, that would be an option to save on print time.