1 / 6
Adapter for 7 inch felt filter bag to 1 1/2 PVC for slime bag or dust filtration — zdjęcie 1
1 / 6

Adapter for 7 inch felt filter bag to 1 1/2 PVC for slime bag or dust filtration

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter for 7 inch felt filter bag to attach to a 1 1/2" PVC connection for use as a pool slime bag or dust filtration

Ocena
0 / 5
Polubienia
1
Pobrania
10
Wydruki
0
Wyświetlenia
90
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Adapter for 7 inch felt filter bag to attach to a  1 1/2" PVC connection for use as a pool slime bag or dust filtration. I made this adapter for this 7" X 32" felt filter bag:
https://a.co/d/hf8bH57

This had a plastic collar that this print adapts to, so if you are using a different one, please check that it uses the same collar. You can do a test fit by printing just a short section of the outside radius using negative modifiers in your slicer or modeling just the part in CAD (step files included).

I printed the main body in TPU and the rest of the parts in PETG, but PETG should be fine for all parts. You'll then need 1 ½" PVC adapters, I used two male adapters and 8" of PVC pipe. The nut then secures one adapter to the main body. I only created the nut because the local big box hardware store did not have a nut to fit, so if you have one or can buy one, that would be an option to save on print time.

Tagi