1 / 3
RaceGow/TinyWhoop budget race gates for 20mm pvc — image 1
1 / 3

RaceGow/TinyWhoop budget race gates for 20mm pvc

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

for the Deta 20mm Medium Duty Rigid Conduit from bunnings or any other pvc with 18mm internal diameter

Rating
5 / 5
Likes
21
Downloads
188
Makes
1
Views
1,193
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Instructions for printing:

for bambu studio or other Slic3r slicer just open the 3mf file to change your printer and fillament settings 

for other slicers the scale factor for the og parts is 90.16%

I used 15% infill with 2 wall loops

ensure fillament is dry for best results 

 

Please consider dropping a like if this design helped you

 

for some printers you may have to wrap a layer of masking tape around the posts to get a tight fit 

BOM:

Deta 20mm x 2m Medium Duty Rigid Conduit x 7

https://www.bunnings.com.au/deta-20mm-medium-duty-rigid-grey-conduit-2m_p0963390 ($2.33 each) 16mm internal diamiter pipe will fit

 

optional:

Scotch 24mm x 55m General Painting Painter’s Masking Tape - 24mm

https://www.bunnings.com.au/scotch-24mm-x-55m-general-painting-painter-s-masking-tape-24mm_p1660167 ($8.16)

 

Instructions:

cut all pvc into 25in leingths and you should end up with 21 peices with 7 offcuts 

 

you will need to print:

16 OMNI_CONNECTORs or

6x - T peices

4x - elbows

2x - 4 ways

4x - 5 ways 

 

total cost including fillament is $16.31 + $5 for fillament ($21.31 total)

 

if you want to use individual parts just delete the others or select all the ones you don't want, right click and toggle the printable option

 

recomend printing in PETG or ABS 

do not recomend printing in pla as it is more likely to crack 

 

Printer: Bambu labs p1s 

Fillament: Bambu labs ABS (be careful not to brethe in fumes) 

infill 15% with 2 wall loops

Tags