Counting matching models…
Instructions for printing: for bambu studio or other Slic3r slicer just open the 3mf file to change your printer and fillament settings for other slicers the scale factor for the og parts is 90.16% I used 15% infill with 2 wall loops…
I added the parameterized Fusion360 file. Just change the diameters under Modify→ Change Parameters for the inner and outer diameter of your pipe.
PVC piping corners for IGOW/RaceGOW scale it to 115% for it to work with 3/4 inch pvc
I didn't want to buy a whole bunch of PVC connectors from a home improvement store and I didn't want to 3D print connectors based on the OD of the PVC. These parts are remixed from the following model because the original model did not…
I didn't want to buy a whole bunch of PVC connectors from a home improvement store and I didn't want to 3D print connectors based on the OD of the PVC. These parts are remixed from the following model because the original model did not…
As PVC tube connectors were not available in my area, I decided to simply 3d print a set of connectors. The files provided are designed for 20mm pvc tubes with an inner diameter of 18mm or 17mm. For a full IGOW set, you need the following…
Connectors designed to be printed in two parts without supports. Suitable for 20 mm PVC tubes. Further glue up with CA glue is required. I've printed it with 0.8 mm nozzle, 0.4 mm layer height in PETG. -------------- Соединители…
