1 / 9
RaceGOW / Tiny Whoop Gate Parts / Schedule 40 PVC Connectors Home Depot (US) — image 1
1 / 9

RaceGOW / Tiny Whoop Gate Parts / Schedule 40 PVC Connectors Home Depot (US)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Connectors and gate stand for RaceGOW parts or other FPV gates using Schedule 40 1/2" PVC.

Rating
0 / 5
Likes
4
Downloads
40
Makes
0
Views
267
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I didn't want to buy a whole bunch of PVC connectors from a home improvement store and I didn't want to 3D print connectors based on the OD of the PVC. These parts are remixed from the following model because the original model did not fit the schedule 40 I bought from Home Depot in the US.

https://www.printables.com/model/1025396-racegowtinywhoop-budget-race-gates-for-20mm-pvc

These parts will snuggly, but not permanently fit into both of the following schedule 40 1/2" PVC from Home Depot (United States):

Please reference the RaceGOW website (https://www.racegow.com/)for quantities of each connector needed. The RaceGOW website says 6x Tee Connectors ("RaceGOW_3-Way_Flat" in my list) but I would also recommend printing 6x "RaceGOW_3-Way-Corner". I ended up printing many of each of these parts because I wanted to make bigger tracks and additional, freestanding gates. I also added "caps" to put on the ends of the PVC sections. I printed all connectors in black PLA to add contrast to the white PVC. I printed the stands in white PLA just because I ran out of black when I wanted to print these.

Stand Notes:

  • There is a purposeful air vent hole in the bottom so there isn't a vacuum when trying to install/remove the PVC.

  • I used scarf joints so the PCV was a smoother install.

  • Unfortunately, I can only print 1 stand at a time on my print bed, but only takes ~3hrs to print one. I didn't want to scale it down to fit more because I wanted the stand to have a wide enough base to support larger gates without falling over.

I'm just getting into 3D Modeling, so I created the stand directly in PrusaSlicer....forgive me, but it adds the flexibility to change sizes very easily.

PRINTING INSTRUCTIONS:

  • Prusa i3MK3S+

  • Sunlu PLA (go nuts with colors!)

  • 0.2mm layer height

  • No need to scale if fitting into the 1/2" PVC linked above, but good idea to print the "RaceGOW_SmallCap" as a test. Should fit snug. might wear out over repeated install/removals, so might be worth printing in a different material.

  • 15% Gyroid infill for strength

  • 2 Perimeters

  • Scarf joints on gate stand only.

  • Grid supports on "RaceGOW_6-Way" only using paint on supports for overhangs only.

  • Paint on fuzzy skin (0.3mm thick and 0.3mm distance) for the outside of the gate stand tube to give grip/texture for installing/removing.

  • Included the 3mf files at the beginning of the parts list if you need to make changes.

Good luck and happy whooping!

Tags