Water Nozzle for 20mm PVC Pipe – High Pressure Jet (6mm Outlet)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
20mm PVC nozzle with smooth reduction to 6mm for strong, focused water jet and longer range.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 24
- Makes
- 1
- Views
- 151
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Open Community License v1
Simple and effective water nozzle designed for standard 20 mm PVC pipe.
This nozzle smoothly reduces the diameter to 6 mm, creating a strong and focused water jet with increased range. Perfect for DIY water filters, pumps, or any setup where you need higher pressure output.
✔ Smooth internal transition for better flow
✔ No supports required (print vertically)
✔ Optimized for real-world use (tested design)
✔ Easy press-fit connection (can be glued if needed)
---
### 🔧 Specifications:
- Input (pipe): 20 mm outer diameter
- Output: 6 mm
- Length: 80 mm
- Wall thickness: 2.5 mm
- Fit tolerance: 0.25 mm
---
### 🧱 Print Settings:
- Material: PETG recommended (PLA possible)
- Layer height: 0.2 mm or lower
- Orientation: vertical (tip up)
- Supports: NOT needed
---
### 💡 Notes:
- If the fit is too tight/loose, adjust scaling or tolerance in CAD
- For best performance, ensure the inside is as smooth as possible
- You can glue it permanently using PVC glue or silicone
---
Feel free to remix or improve 👍
