Water Nozzle for 20mm PVC Pipe – High Pressure Jet (6mm Outlet)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
20mm PVC nozzle with smooth reduction to 6mm for strong, focused water jet and longer range.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 1
- Wyświetlenia
- 151
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Open Community License v1
Simple and effective water nozzle designed for standard 20 mm PVC pipe.
This nozzle smoothly reduces the diameter to 6 mm, creating a strong and focused water jet with increased range. Perfect for DIY water filters, pumps, or any setup where you need higher pressure output.
✔ Smooth internal transition for better flow
✔ No supports required (print vertically)
✔ Optimized for real-world use (tested design)
✔ Easy press-fit connection (can be glued if needed)
---
### 🔧 Specifications:
- Input (pipe): 20 mm outer diameter
- Output: 6 mm
- Length: 80 mm
- Wall thickness: 2.5 mm
- Fit tolerance: 0.25 mm
---
### 🧱 Print Settings:
- Material: PETG recommended (PLA possible)
- Layer height: 0.2 mm or lower
- Orientation: vertical (tip up)
- Supports: NOT needed
---
### 💡 Notes:
- If the fit is too tight/loose, adjust scaling or tolerance in CAD
- For best performance, ensure the inside is as smooth as possible
- You can glue it permanently using PVC glue or silicone
---
Feel free to remix or improve 👍
