LCR-T4 Tester with Battery lead
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
LCR - T4 (Transistor, Capacitor, Resistor, etc.) Tester case with the addition of a separate opening battery side
- Ocena
- 4,667 / 5
- Polubienia
- 19
- Pobrania
- 295
- Wydruki
- 5
- Wyświetlenia
- 914
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
LCR - T4 (Transistor, Capacitor, Resistor, etc.) Tester case with the addition of a separate opening compartment for a 9V battery type 6F22.
It is recommended to position the parts when printing as indicated in the 6th image and use supports if possible if they separate easily with your slicer settings.
M3x16 countersunk screws are required to close the cover of the tester unit.
To close the battery cover, you need one countersunk screw with size from M3x8 to M3x16.
Print Settings
Printer:
Flying Bear Ghost 5
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
30
Filament:
YaSdelal'ь PETG
Category: DIY