1U rack cable management velcro tiedown point
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small simple part that gets attached onto a rackmount spot, acting as a tiedown point for velcro cable ties or similar
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 176
- Wydruki
- 1
- Wyświetlenia
- 629
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
I wanted a cleaner way to run a few cables along my small server rack and made this little part. You just put a velcro cable tie through the middle part to hold cables on. Zip ties would work too, but I don't really like zip ties for such things. Could be attached both to an empty spot on the rack or on top of an existing rack ear for something.
There are 5.5mm and 6.5mm hole variants to cover the different common rack screw sizes with some margin. Should be fine to print in PLA and can be printed either laying on its flat face facing up or laying on its “belly”
I also have included the OpenSCAD source file if you want to play with it, though note it requires the BOSL library which can be found here https://github.com/revarbat/BOSL