Dillon Bellcrank Cube 13871 (plastic white square in powder bar Dillon 550 / 750)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The small white plastic square in your Dillon Powder Die/Bar that goes missing sometimes. You know the one.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 320
- Wydruki
- 1
- Wyświetlenia
- 929
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
This is my first ever published model, and yes, it's literally a square with a hole in it.
I recently got a Dillon 550 and when I had powder issues I saw this stupidly small white square had fallen onto the floor - somewhere. I managed to find it but after this happening a few random times, I decided to print a few.
I saw this square had a model online already at a paid website for $2…. For a square with a hole in it? That goes against the ethos of open-source 3D printing for me. So I was lucky I still had mine to measure and can now share it for free.
Dimensions I measured from my own square are 9.15mm x 9.15mm x 2.30mm. Inside hole diameter: 5mm. The square is actually a bit smaller than would fit in the powder bar but it needs to move a bit.
STL made in Tinkercad so no STEP-file.
Printed this myself in 98-99-100-101-102 percent scaling to test PLA and PETG. The smaller ones don't have the peg fit in the hole, but I would still advise doing the same because of different printers, filaments and all that.