Hose or attachment adapters compatible with Ryobi stick vacuum
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapt your stick vac to suck up more things
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 118
- Wydruki
- 0
- Wyświetlenia
- 876
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Each of these adapters has one end that fits onto Ryobi stick vac's with part numbers...
- PCL720
- PBLSV719
- PBLSV716
- PBLSV717
- PCL704 (requires accessory adapter that comes in the box with this vac)
Locking hose adapter (part C in pictures) fits onto the hose include with...
- A32K01 = 4pc Jobsite hand vacuum accessory kit
- P3240 = 3 Gallon Project Wet/Dry Vacuum
- PCL733 = 1 Gallon Wet/Dry Vacuum
- PCL734 = LINK 3 Gallon Wet/Dry Vacuum
- A32VH03 = 6 ft. x 1-1/4 in. Wet/Dry Vacuum Hose
Large reduction adapter (part D in pictures) fits onto common 2-1/2" Ridgid Dual-flex (black) hose (the vacuum end only)
Suggested print settings:
- 0.20mm QUALITY
- Prusament PETG (pictured using OVERTURE PETG Grass Green)
- Infill density 20%
- Infill pattern Cubic
- 3 Perimeters
- Supports are only required on the locking adapter (part C in pictures)
- Brim is not required as it's built into the model, use a hobby knife after printing to remove it from the inside of the tube
Don't have a 3D printer yet? That's OK, order already printed from…