Hose or attachment adapters compatible with Ryobi stick vacuum
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapt your stick vac to suck up more things
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 118
- Makes
- 0
- Views
- 876
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Each of these adapters has one end that fits onto Ryobi stick vac's with part numbers...
- PCL720
- PBLSV719
- PBLSV716
- PBLSV717
- PCL704 (requires accessory adapter that comes in the box with this vac)
Locking hose adapter (part C in pictures) fits onto the hose include with...
- A32K01 = 4pc Jobsite hand vacuum accessory kit
- P3240 = 3 Gallon Project Wet/Dry Vacuum
- PCL733 = 1 Gallon Wet/Dry Vacuum
- PCL734 = LINK 3 Gallon Wet/Dry Vacuum
- A32VH03 = 6 ft. x 1-1/4 in. Wet/Dry Vacuum Hose
Large reduction adapter (part D in pictures) fits onto common 2-1/2" Ridgid Dual-flex (black) hose (the vacuum end only)
Suggested print settings:
- 0.20mm QUALITY
- Prusament PETG (pictured using OVERTURE PETG Grass Green)
- Infill density 20%
- Infill pattern Cubic
- 3 Perimeters
- Supports are only required on the locking adapter (part C in pictures)
- Brim is not required as it's built into the model, use a hobby knife after printing to remove it from the inside of the tube
Don't have a 3D printer yet? That's OK, order already printed from…