BeamCase ATX Grill Mesh Panels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For use with metal grill mesh
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 1228
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Use metal automotive grill mesh. The metal mesh is sandwiched between the makerbeams and the printed panels. Grill mesh can be cut with good scissors. These panels require 1 cut piece per side (even though a side may have two printed parts)
Standard Beamcase hardware applies here (m3 nuts and m3x8mm countersunk screws).
I used aluminum honeycomb 6mmx1mm grill mesh. Previously you could buy 3x 13"x13" flat packed pieces, but it seems to come rolled now:
https://www.amazon.ca/dp/B09G94X3H5?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Sorry, you're going to need a large print bed for these!
There's a lot of variations one could make with these panels. If you'd like to create your own, it's worth checking out my Onshape link. I've even made a set of “basic measurements” tabs so you can start out with the basic measurements and screw hole placements.
Designed in Onshape:
https://cad.onshape.com/documents/5e9f209305e33ca6274cebdf/w/0c340af007c82a7aead48515/e/b51d8c35411eed9fa77db914