BeamCase ATX Grill Mesh Panels
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For use with metal grill mesh
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 49
- Makes
- 0
- Views
- 1,228
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Use metal automotive grill mesh. The metal mesh is sandwiched between the makerbeams and the printed panels. Grill mesh can be cut with good scissors. These panels require 1 cut piece per side (even though a side may have two printed parts)
Standard Beamcase hardware applies here (m3 nuts and m3x8mm countersunk screws).
I used aluminum honeycomb 6mmx1mm grill mesh. Previously you could buy 3x 13"x13" flat packed pieces, but it seems to come rolled now:
https://www.amazon.ca/dp/B09G94X3H5?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Sorry, you're going to need a large print bed for these!
There's a lot of variations one could make with these panels. If you'd like to create your own, it's worth checking out my Onshape link. I've even made a set of “basic measurements” tabs so you can start out with the basic measurements and screw hole placements.
Designed in Onshape:
https://cad.onshape.com/documents/5e9f209305e33ca6274cebdf/w/0c340af007c82a7aead48515/e/b51d8c35411eed9fa77db914