Ryobi RYAC701 Electric Rototiller Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement handle switch for Ryobi RYAC701 Electric Rototiller
- Ocena
- 4 / 5
- Polubienia
- 5
- Pobrania
- 108
- Wydruki
- 1
- Wyświetlenia
- 369
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
The handle switch for my rototiller broke. Took a while to reverse engineer it but I did make this working model. It is still in service over a year later. I think the center pin is just a touch too tight but I sanded it out and its fine. Please unplug your tiller before attempting a repair if you do. This is live 120v (US) in that box, it will hurt you. In the photos you will find: My final printed handle, the original which I glued together temporarily for measurements, and a screenshot from Ryobi's website circling the handle.
I recommend at least PETG and pretty stiff infill (I used 20% I think?). It is in a very harsh environment outside and high vibration.