Adjustable front Z-stepper plates for Flying Bear Reborn 2, also fits Voron 1.x/Trident/2.4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've made my Flying Bear Reborn 2 into a very custom Voron Trident 350. To fit the original Voron parts, these help alot
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 338
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
I rebuilt my Flying Bear Reborn 2 into a very custom Voron Trident 350. At some point it was time to replace the old dual-Z with the Trident's triple. To make thing fit and line up properly, I worked out these modified Z-stepper plates. After getting the experience with aTinyShellScript's XY gantry metal plates, I wanted to continue this trend and use metal plates everywhere possible.
So, I have nearly designed a whole Z-gantry that uses metal plates and printed adapters without any bed extrusions needed, possibly adding some Z-travel aswell at least in my case.
Check this stuff out on your own volition. I will not take any responsibilites what happens to your printer.