1 / 1
Gridfinity Hobby Knife Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity holder for a hobby knife
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 26
- Wydruki
- 2
- Wyświetlenia
- 188
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Made a holder that's 4x1x4 gridfinity units to fit my hobby knife. Although mine is from Parkside, I imagine it would fit a lot of other ones around 120x11mm. I have seen a lot of smaller hobby knives/scalpels which are smaller in diameter, so maybe look for a different model if yours is like that. Be careful to store your knife with the blade edge pointing downwards, to not cut yourself accidentally.
The gridfinity template this was made with was generated with gridfinity-rebuilt-openscad.