1 / 1
Spider Effector System Microswitch Probe
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Attachment for microswitch probe to Kossel adaptation of Universal Effector System: https://www.thingiverse.com/thing:6831701.
Parts required:
- 2x20mm nail to act as probe pin (grind/round the tip before use and sand any rough parts to make nail slide freely and fall down on it's own weight when released)
- small microswitch (distance between mounting holes around 6.5mm, remove metal lever)
- 2xM2 bolts with nuts to mount the microswitch (maybe two pieces of filament heated and squeezed to fill excess play would also work :) )
My previous probe mounted on the edge of effector had too much location bias, this one became usable for bed leveling.