1 / 1
Spider Effector System Microswitch Probe
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Attachment for microswitch probe to Kossel adaptation of Universal Effector System:…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 69
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Attachment for microswitch probe to Kossel adaptation of Universal Effector System: https://www.thingiverse.com/thing:6831701.
Parts required:
- 2x20mm nail to act as probe pin (grind/round the tip before use and sand any rough parts to make nail slide freely and fall down on it's own weight when released)
- small microswitch (distance between mounting holes around 6.5mm, remove metal lever)
- 2xM2 bolts with nuts to mount the microswitch (maybe two pieces of filament heated and squeezed to fill excess play would also work :) )
My previous probe mounted on the edge of effector had too much location bias, this one became usable for bed leveling.