Counting matching models…
Summary This is a model of a Lancia Delta HF Integrale Evoluzione 2 in a kit card style. Some characteristic details can be discovered. Equipped with seperate exhaust ;-) After printing, the model can be assembled with the help of…
Taking the thing http://www.thingiverse.com/thing:351236 , I made some improvements, as magnetic joint, spool holder, endstop switches, carriages with 608zz, effector with autoleveling sensor and power plate with switch and fuse. All was…
Small LED strip holder for Rostock 301 delta printer with 10mm rods at 60mm distance. You will need 64mm length of 15mm width aluminum led extrusion and piece of any 12/24v led strip.
I was trying to install a new Delta bathroom faucet in a very cramped pedestal sink, and didn't have a wrench to fit in the close quarters under the sink. The nut to fix the drain to the bottom of the sink is about 45mm, and depending on…
I recently purchased the Mosquito for Prusa MK3S+ upgrade kit from Slice Engineering, that comes with the ASA printed extruder parts. On my previous setup, I've been quite pleased with the Delta-P print fan duct and wanted to use it with…
This a new 5015 intake for the delta P duct v2r22 addon with a cone airflow entry. Did not like like the existing ones very much so I made this. On a bench test the inside cone improves cooling airflow by 3-8% (depending on cooler speed).…
I wanted to have an proper power connector in the bottom of the printer. So i modified a corner to fit an XT60 connector that can be glued in.
Abstract Additive manufacturing has benefited a wide range of different fields, both scientific and consumer, but one area that is lacking is in geography. Standard geographical maps have remained the on same 2-dimensional (2d) flat piece…
Part for repairing Asus ROG Delta headphones. In the stock version, the headphones have a plastic wire terminal that does not limit bends and the wire eventually fails. With this model I was able to repair my headphones. There are 2…
Welcome to the huge update to my delta 3D printer the Delta Flyer! LDO Kit Pre-Order!!! Other Approved Vendors Official Delta Flayer Manual Quick Start Guide 3D View for build assistance This is a much sleeker delta 3D printer that now…
End Clamp for Delta T3 Fence. This clamp prevents the far end of the fence from lifting off the table. This lifting can be an issue if you are using a fence mounted device such as a Little Proteus Powerfeeder . Printing: Any suitably…
Premise The scrappiest most Tony Stark-iest built in a cave with a box of scraps Min-delta by Rolohaun, Remixed by Squirrelbrain and then by me. My plan is to build this thing with the least number of purchased parts I can stand. Doesn't…
To provide additional safety operating a 80s Delta Unisaw. Modern saws have a paddle for the stop button that can be reached with a knee or quickly located with a hand. This is an upgrade for the Saw and easy to install with two screws.…
Fishes with NFC cards created for the LudoDelta playroom. LudoDelta - La tana del Goblin Via R. Canger, 19, 84014 Nocera Inferiore SA LudoDelta APS - La Tana dei Goblin Salerno | Nocera Inferiore | Facebook LudoDelta APS - TDG Salerno (@…
This model is an extension of the original cup base of the Delta Q Mini coffee machine. The original cup base positions the cup relatively far from the coffee spout, which can cause splashing during extration, leading to mess. The…
How good is the model? Please have a look here ! (5.0 stars @ 2+ ratings) Summary This is a model of a Lancia Delta HF Integrale Evoluzione 2 in a kit card style. Some characteristic details can be discovered. Equipped with seperate…
I wanted some stand for my pistol for maintenance things or to store it that way in safe. Category: Gadgets
This mod replaces the three stock bottom frame spacers with a modular, two-piece design. By separating the Frame Spacer from the Bed Mount , you gain the flexibility to use different materials for different functional needs. Why use this…
It usually takes me two or three tries to get the sandpaper properly aligned with the sanding pad 🙄 A simple alignment jig makes this a bit easier. I designed it for my Bosch delta sander and multitool sanding plate AVZ 93 G. I didn't…
You can use the model however you like, as long as you give me credit.
You can use the template however you like, as long as you give me credit.
You can use the template however you like, as long as you give me credit.
I needed to tighten the gold 36mm nut on my Delta faucet to make it less wobbly... A simple wrench. If your faucet has a ton of corrosion its going to be difficult to turn. I used a hammer to slightly tap the handle to move the nut. Print…
Feet for the Delta Flyer Refit printer. They press fit into the bottom of the extrusions. There are two versions. Foot_Solid - if you just want to print in something flexible. Foot_Hole - Takes a 25mm anti-skid pad. It also has a hole…
I really like the honeycomb motif on this LattePanda 3 Delta case . Alas, my success rate at producing an intact case has been somewhere around 20-30%. The model prints fine, but it's nearly impossible to remove the support plates without…
Quite expensive calibrator in transport box. Buckle get broken over time. MesaLab company do not bother to even reply mail nor offer or shipp replacement. Shame on MesaLab.…
Performance (Dart Zone Springs) Low Power NPX Spring : Light prime ~110 FPS Stock NPX Spring : Stiff prime ~150 FPS High Power NPX Spring : Very stiff prime ~180 FPS.…
Print in 0.2mm 15% infill, layer 2 walls lines, support where touching build plate enabled. Print the SimpleKite.stl and SimpleKiteCounterweight.stl parts. Stick the skewers in like you see on SimpleKiteFull.stl. Cut and attach the…
HII, QUANTUMFORGE AGAIN, OUT WITH ANOTHER MODEL!!! ABOUT THE ZENITH 5: DELTA Delta is the explosive, unhinged middle form of the Zenith 5 line — the one who wakes up angry, stays angry, and somehow gets angrier. He’s fast, loud, and built…
Delta-Rockwell 1 x 42 Grinder/Sander Pulleys/Wheels. These fit the 31-350 & 31-351 models. Drive Pulley - PN: 926-11-991-9441 Rockwell 31-351 Drive Wheel NoTire v6 This is printed as one part, I printed with PLA , 90% infill, supports…
This Airplane Tail plate is very easy to print , part of my collection of different airline liveries . There is also a base so you can print other tails and create your own desktop organizer of favorite airlines. A version with a hoop for…
Branded Life counter for two-color printing use colors in the following order: blu white blu Printer settings 0.20 mm Printed with Prusa Core One with only one hotend. If you don't know how to do it, consult the following page for help:…
Bird’s Foot Delta — Mississippi River This model represents the Bird’s Foot Delta of the Mississippi River in southeastern Louisiana, USA. The delta is characterized by long, narrow distributary channels extending into the Gulf of Mexico,…
This is a layered sculpture of the Lancia Delta Integrale HF. Print requires some supports which should be carefully removed due to the fragile nature of the print. 3MF project files are included for different print options: Main project…
Fan shroud that can be mounted onto Delta P Extruder cover. One shroud is for extruder without sock and 1.5mm lower one is for extruder with sock. I am using dragon hotend with my mod for extruder cover but outside is the same for both.…
The thing missing from the original STLs and needed most is the 1 piece lid option. Suitable for printing on 300mm² or larger printers. Version compatible with 7" touchscreen from Ali Express found here…
Status: April 3. 2026 - The printer has been working well on the base. I'm working on pictures of the wiring. Note: This project is very much a work in progress. Models will change but I'm looking for feedback on the model, consideration…
Cette pièce est un composant de montage sur mesure , conçu pour assurer le maintien mécanique des nappes de protection à excroissances (type Delta-MS) sur les parois enterrées (béton, maçonnerie, etc.). 1. Conception Géométrique Profil…
As usual, I recommend printing in your printer’s minimum layer height to preserve the figure’s detail. Any filament type will do. Characters by Toby Fox.
A 3d figurine of the Shadow Mantle holder from Deltarune. Inspired by the Deltarune figures at Fangamer. please share your makes!
These models are intended to be replacement miter gears and an improved bearing bracket for the Delta 31-250 18-36 drum sander. Please note that this design is a slight departure from the original nylon miter gears that used a roll pin to…
I am sharing a 3D model of an antenna insulator designed for delta loop antennas. It is designed to keep the antenna wire at the perfect triangle angle at each corner, ensuring the correct delta loop shape. The model also features an…
A part cooling fan mount and nozzle for the 713Maker ball cup effector plate using a 3010 blower. I am rebuilding my old MakerLibre 1515 Mini Kossel and upgrading it along the way. I decided to go with the SeeMeCNC ball-joint effector…
Hey there! Check out my website to see the latest products I've designed—now available for you! Don't miss out, hit the link and explore what's new! My Shop: https://buymeacoffee.com/cc3dprojects/extras My Website:…
Easy custom supports with screws for using on a flat surface. Delta PSU fits perfect. Printed in PETG.
I designed this Optical End Stop Switch mount & carriage flag to fit my 2020 delta printer. I also made a cover to fit over the switch to help prevent stray light affecting the sensor. The printer started as a FolgerTech Kossel, which I…
See @Kugas_120748's original model for description. Was going to attempt to use this as a base to fit another project I'm working on, but it doesn't quite fit my needs. Before working this out I noticed the original STL file had some…
Welcome to my happy mistake the MIN Micro Delta 3D printer. I set out to design a 120mm build area mini delta 3D printer and well mistakes were made. The printer frame ended up too small but turned out really cool. Specs: 70mm x 95mm…
This is a filament spool holder for the 3d printer Monoprice mini v2 (also v1). A axial baring makes it silent and smooth. The spools can be stored on top of the printer without interfering while printing. There are two kind of handles…
Lattepanda 3 Delta mount for Engineering fixture plate
Bed - Overhang - Bridging - Top layer Test for delta printers, but can be used for all kind of printers.
the deltadromeus is a hungry carnivore that loves to eat yummy meat and it hunts a juvenile sauropod from the middle cretaceous
Use these hooks to perfectly mount your RC delta wing on the wall. Includes countersunk screw holes for a #10 pan head s
Holders for fitting PSU outside of enclosure, cabinets, racks etc. Mounted with 4 screws ∅4 countersunk heads. PSU has a little movement, but nothing to worry about. In case of any noises/PSU shaking I'll rescale holders a little for…
A Duet2Wifi borad mount for the Monoprice Mini Delta. Uses the original board's mount holes.
Half squash ball feet for Anycubic Kossel plus (20x20 frame delta printer) This is a remastered version.
A very specific title for a very specific part. Technically this is not the entire end effector, just the groovemount portion, so it's compatible with any basic end effector that supports groovememounting (mine is aluminum). Designed to…
Radial Fan, 7020 Model, inspired to Delta BFB0712H . Totally editable, published the following elements: Rotor → girante.prt Motor support → corpo_motore.prt Upper Carter → carter_ventola_1_dx.prt / .stl Base Carter →…
The Deltarune, turned into a pendant! SVG Source: https://svgur.com/s/9Hx
it is a similar creation to the deltarune logo ( i cant get it to look the same ) ( the picture shows the finished project )
Plain and simple replacement for the endcaps on this awning, in case yours arrived broken or broke over time. Recommend printing in ASA, ABS or PETG in order of descending priority.
I liked the model of Delta-P V2-R2 fan duct but didn't find compatible type to fit MK2S printer that I had so I made this. Modified the original extruder cover that comes with the printer and changed the connection points on the V2-R2 fan…
Liked https://www.thingiverse.com/thing:3702677 , but wanted more LEDs to fit. Thin Adapter for a ~15cm LED Strip, glued to the Light Holder Printed in PLA Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…
General Description Recommended Materials & Settings PETG (TPU Could Potentially Be Used Instead *Not Tested, Infill & Pattern May Differ) (For Bottom & Top Piece) PLA or PLA+ (For Spacers 1-6mm, *PETG Can Also Be Used Just Fine In Order…
by CriptasticHacker https://hackaday.io/CriptasticHacker https://www.youtube.com/@CriptasticHacker Remixed from @John_148569 https://www.printables.com/model/208514-shower-knob-for-delta-faucet/remixes My Delta knob broke after about 30…
Spool holder for micro delta 3d printer. Can be printed on the 110mm diameter bed. https://reprap.org/wiki/Micro_Delta/fr Requires: 4x bearings with outside diameter <= 13mm, width <= 5mm and inside diameter 4mm M4 screws M4 nuts
Summary This is a model of a Lancia Delta HF Integrale Evoluzione 2 in a kit card style. Some characteristic details can be discovered. Equipped with seperate exhaust ;-) After printing, the model can be assembled with the help of…
Parametric model designed in OnShape to create a tight fitting zero clearance insert for my Delta 36-725 T2 table saw. I printed in PLA with 15% infill and 100% infill for the area in the blade pocket to provide added support after the…
Delta-P Duct: Improved internal airflow for better laminar flow across the nozzle tip lengthened the duct tips by 5mm to better cover the part being printed below the nozzle. lowered the duct base to get the airflow pointing below the…
Taking http://www.thingiverse.com/thing:572371 , I added support for 2020 profile and hdd motor instead bearings. All printed with 0.3mm and 25% infill. UPDATE 30/8/17: I added pictures of the type of HDD that you can use: 54mm external…
Taking the thing http://www.thingiverse.com/thing:351236 , I made some improvements, as magnetic joint, spool holder, endstop switches, carriages with 608zz, effector with autoleveling sensor and power plate with switch and fuse. All was…
This carriage is based on http://www.thingiverse.com/thing:2202796 . Congratulations for your design! It was adapted for using with 608zz bearing. There are two parts: carriage and ball support. The ball support has 51mm between balls,…
I purchased an older scroll saw and it was missing the insert, so I modeled, printed, and test fit. So far so good. The nice part is, if you end up cutting it, it's plastic not metal, and it's quick to print a replacement.
Small LED strip holder for Rostock 301 delta printer with 10mm rods at 60mm distance. You will need 64mm length of 15mm width aluminum led extrusion and piece of any 12/24v led strip.
This is a simple mount I designed for the Delta Dore Tydom 1.0 hub. It can be used either vertically or horizontally, as the hub's bottom “fins” fit in the slots on the mount, preventing it from sliding. I mounted it using screws, but you…
Illuminate your space with the iconic Delta Coffee logo, a tribute to the rich heritage of Portuguese coffee culture. This stylish lightbox is perfect for coffee lovers, baristas, or anyone who cherishes a great brew. Its sleek design…
Ich hab das Teiel aus PLA gedruckt und es hält seit einem Jahr spitze!
The fit is pretty tight so depending on your printer you may need to trim it down a bit. I just had to used a deburrer to shave off the elephant foot an make a nice bevel so it would press right into the frame. The files for the frame can…
This is my remix of the Lattepanda 3 Delta case. I have added more space for the RP SMAs to fit more easily. I have also bought an IPEX 4/SMA conversion and additional high-gain Wi-Fi antennas .
After purchasing the Tree Bookshelf from Costco, I noticed an issue with poorly glued laminate on one of the feet starting to break off due to friction from the carpet it was installed over. I create these foot caps / covers that will…
****These models have not been printed or tested yet, I have not had the time to install and test them**** You will need a dremel to enlarge the hole where the original hotend went, to make room for the new one. The purpose of this design…
I was trying to install a new Delta bathroom faucet in a very cramped pedestal sink, and didn't have a wrench to fit in the close quarters under the sink. The nut to fix the drain to the bottom of the sink is about 45mm, and depending on…
Simple prints that you can (zip)tie to the back of your model, providing a large surface area to use double sided tape.
I recently purchased the Mosquito for Prusa MK3S+ upgrade kit from Slice Engineering, that comes with the ASA printed extruder parts. On my previous setup, I've been quite pleased with the Delta-P print fan duct and wanted to use it with…
Added as a remix to keep it with the Delta Flyer 3d printer but I designed this myself. Can be printed out of PLA or PETG A threaded M3 heat set insert is installed, so it can be screwed into the door (via M3 screw). I suggest using a…
This a new 5015 intake for the delta P duct v2r22 addon with a cone airflow entry. Did not like like the existing ones very much so I made this. On a bench test the inside cone improves cooling airflow by 3-8% (depending on cooler speed).…
I wanted to have an proper power connector in the bottom of the printer. So i modified a corner to fit an XT60 connector that can be glued in.
